Pioneer BDP-120 Software Update, Enter the 4-digit number using, Press Enter to start updating

SETTINGS

Software Update

This function allows software updates by inserting a USB memory device with the update file into the BD STORAGE/SERVICE terminal on this player.

To check for the availabitity of a software update, visit www.pioneerelectronics.com/PUSA/.

1Insert the USB memory device with the update file into the BD STORAGE/SERVICE terminal on rear of this player.

2Press HOME MENU to display the Home Menu screen.

3Press  to select “Settings”, then press ENTER.

4Press  to select “Software Update”, then

ENTER.

• If you have not yet set the password, go to step 6.

5Enter the 4-digit number using 0-9.

Enter 4-digit password

6Press ENTER to start checking data in the USB memory device.

Insert USB memory device containing the software update file.

OK

7During the data checking, “Checking” blinks.

Now checking the data in USB memory device.

Checking

•The current version of this unit software and the version of the update file on the USB memory device are displayed. To update this player software with update file, select “Yes”, and press ENTER.

Software update file is detected in the USB memory device. Start update?

Current Ver. :		**1234567
Update Ver. :		**2345678
	Yes		No

•If the USB memory device is not properly installed or the correct update file cannot be found on the USB memory device, an error message is displayed. Check the file on the USB memory device, and then reinsert the USB memory device correctly.

Software update file is not detected in the USB memory device. Confirm that you have transferred the file

to the USB memory device and retry software update. Confirm that you have inserted the USB memory device into the correct device.

OK

There is more than one software file in the USB memory device.

Confirm that only the software update file is in the USB memory device.

OK

8Press ENTER to start updating.

•The screen becomes dark for a while until the update screen can be displayed. Please wait for the update screen to appear. Do not unplug the AC cord.

The picture will temporarily go dark until the software update display appears.

Wait several minutes and do not unplug the AC cord.

OK

Now updating

*Do not unplug AC cord.

Update Version **2345678

30%

9When the software is successfully updated, a screen is displayed indicating that the update process is completed.

•If the update has failed, check the file in the USB device and try Software Update again.

10Press STANDBY/ON to turn off the player.

11Remove the USB memory device.

44