![](/images/new-backgrounds/1251797/25179757x1.webp)
Connecting to a TV using a RF Modulator
Connection 2
Connecting the TV to the DVD through the | Figure 2 |
|
Cable or Satelite Box |
| DVD (Back) |
Continued
Your TV (Back)
1)Connect the
2)Connect the opposite end of the composite- video cable into the back of the RF modulator. Make sure to match up the colors correctly.
3)Connect a coaxial cable from the "Antenna Out" jack on the back of your Cable or Satellite receiver to the "Antenna" jack on the RF modulator. The coaxial cable is the
AUDIO OUT | UHF/Antenna IN | |
COAXIAL |
| |
1 | L | Coaxial |
(L)
(R)
2R
VIDEO OUT
TV /Audio Input
Conntection
TV / Video Input | (V) | L | R | V | To TV Antenna |
Conntection |
|
|
|
|
|
(V)
(L)
(R)
Your Cable/Satelite Box
OUT IN
To your Cable/Satelite connection
4)Connect a coaxial cable from the "To TV" jack on the RF modulator to the jack on the back of your TV.
5)Make sure your TV is set to the appropriate channel before using your DVD player. In most cases, this is channel 3 or 4.
Connection 3
Connecting the TV , DVD, VCR, and Cable or Satelite Box
1) Connect the |
cable to the back of your Apex DVD player. This |
Figure 3
(Back)
Your TV (Back)
cable has three prongs, one each in yellow, red, |
and white. The yellow prong will go into the jack |
labeled "Video Out"; the white prong will go into |
the jack labeled |
into the jack labeled |
2) Connect the opposite end of the composite- |
video cable into the back of the RF modulator. |
AUDIO OUT
COAXIAL | L | |
1 | ||
| (L) | |
| (R) | |
2 | R | |
VIDEO OUT |
| |
(V) | TV / Video Input | |
Conntection | ||
| ||
| (L) | |
TV /Audio Input | ||
Conntection |
|
UHF/Antenna IN
Coaxial
L R V | To TV Antenna |
(V)
(R)
Make sure to match up the colors correctly. |
3) Connect a coaxial cable from the "Antenna |
Out" jack on the back of your cable or satellite |
receiver to the "Antenna In" jack on the back of |
Your Cable/Satelite Box | Your VCR (Back) | |
UHF/Antenna OUT | ||
|
| Coaxial |
OUT | IN | IN |
|
| OUT |
your VCR. The coaxial cable is the |
4) Connect a coaxial cable from the "Antenna |
Out" jack on the back of your VCR to the |
"Antenna" jack on the RF modulator. |
5) Connect a coaxial cable from the "To TV" jack |
on the RF modulator to the jack on the back of your TV.
6)Make sure your TV is set to the appropriate channel before using your DVD player. In most cases, this is channel 3 or 4. Also make sure
To your Cable/Satelite connection
that the VCR is set to the appropriate channel, as well. This selector is usually on the back of your VCR. Consult your VCR manual for further information.
A P E X | D I G I T A L | 12 |