Volume control
Vol +/—, 
(Mute switching)
Press the "VOL+" button to increase the volume. With the "VOL
press the 
-button
When you activate the VOL +/— buttons j on the URC basi- cally the volume adjustment on the TV device is addressed, regardless thereof, which device button e was pressed previ- ously. However, this does not apply to the following devices: “AMP”, “DVD”, “ASAT”, “DSAT” and “CBL” since it can be assumed that these devices are equipped with their own volume control.
For operation
>> To operate one of the programmed devices with the URC first press the corresponding device button e.
Then point the URC to this device and press the desired button.
>> Put the number buttons o exactly as you do with the original remote control. Before you make a two digit
entry press, if necessary, the 
button a.
>> Press the FAV/EPG button 1( to start the electronic pro- gramme guide of a device equipped with this function.
>> If you press the S button r the date is superimposed for 10 seconds in the LCD display q below and on the right.
>> Whilst you hold down one of the device buttons e the active code for this device will be superimposed below to the right in the LCD display q.
>> Via the MENU button k you access the dialogue for the setting of the respective target device.
>>Press the illumination button d to switch the display and button illuminations on and/or off.
All OFF
Tips:
With the button 
ALL OFF (all off) w all devices that are switched on can be automatically switched off. This func- tion can switch on again devices that have already been switched off (depending on the device). For this hold down the ALL OFF button w for approx. 5 seconds. This will only function under the following circumstances:
1.A visible connection exists between all the devices and the URC.
2.Automatic code search, brand code search and MACRO function are not active.
3.All target devices must be suitable for remote control switch off.
- 23 -