Plasmon LF 6602 user manual TEMPERATURE, Humidity and Altitude, Temperature

Page 16

TEMPERATURE, HUMIDITY AND ALTITUDE

The following table lists the temperature, humidity and altitude limits for the LF 6600 drives installed in the LF 6602.

Temperature, Humidity and Altitude Limits

CONDITION

OPERATING

NONOPERATING

STORAGE/TRANSIT1

Temperature

10° to 42° C2

-40° to 66° C

-40° to 66° C

 

(50° to 108° F)

(-40° to 151° F)

(-40° to 151° F)

 

 

 

 

Maximum Rate of

11° C/hr

20° C/hr

20° C/hr

Change

(20° f/hr)

(36° F/hr)

(36° F/hr)

 

 

 

 

Humidity

10 to 90%

5 to 95%

5 to 95%

(Noncondensing)

 

 

 

 

 

 

 

Maximum Rate of

10%/hr

10%/hr

10%/hr

Change

 

 

 

 

 

 

 

Maximum Wet

28° C

46°C

46°C

Bulb

(82° F)

(115° F)

(115° F)

Temperature

 

 

 

 

 

 

 

Minimum Dew

2° C

2° C

2° C

Point

(35.6°)

(35.6°)

(35.6°)

 

 

 

 

Altitude

-300 to 3,000 m

-300 to 3,000 m

Storage

 

(-984 to 9840 ft)

(-984 to 9840 ft)

-300 to 3,000 m

 

without Media

 

(-984 to 9840 ft)

 

 

 

Transit

 

-300 to 2,000 m

 

-300 to 12,000 m

 

(-984 to 6562 ft)

 

(-984 to 40,000 ft)

 

with Media

 

with Media

 

 

 

 

1Storage specifications are for 90 days maximum in Plasmon LMS packaging. No condensation is permitted. Transit spec- ifications are based on a maximum 1-week period in a factory-sealed container.

2Maximum operating temperature is 42 _C for a free-standing drive at sea level unless otherwise stated. Maximum oper- ating temperature is derated linearly above 300 m altitude to 38 _C at 2,000 m altitude.

3See the LD 6100/LF 6600/LF 6602 Product Specification (P/N 97653977) for more information concerning the tempera- ture and humidity operating range.

4Media limits maximum operating altitude to 2000 m. For conditions and limits pertaining to the media, refer to the LM 6000 Media Specification (P/N 97647044).

PLASMON LASER MAGNETIC STORAGE - LF 6602 USER MANUAL

Page 16

Image 16
Contents Optical Disk Drive Page Page Warnung Agency Compliance and Approval Page Table of Contents Accessories Appendix a Scope Related PublicationsPage General Description Page Drive Characteristics Front PanelRear Panel Dimensions and Weight TEMPERATURE, Humidity and Altitude TemperatureAC Power Requirements Shock and VibrationAC Power Cord Tilt RangeHeat Dissipation Particulate LimitsLocation of LF 6600 Warning Labels Page Unpacking and Repacking Instructions Unpacking the LFUnpacking the LF Removing Banding Straps from LF EP005017 Positioning Ramp on Pallet Moving the Shuttle to the Home Position Inspecting the LF Repacking the LFShipping Bracket on Rear of LF 6602 Cabinet Manually Closing the Drives Baseplates Moving the Shuttle Assembly to the Shipping Position Page Page Installation Installation RequirementsScsi BUS Considerations Terminator LF 6602-to-Host Cable Connection Connecting Power and Scsi Cabling SINGLE-DEVICE Configuration MULTIPLE-DEVICE Configuration Connector VerificationExtension Procedures LF 6602 Cabinet Configuration Showing Interlock Location Page Controls and Indicators Operating InstructionsTEST/SELECT POWER-ON Procedure Operating Mode Modes of OperationOperating Condition DOC Display English French German Configuration Mode Viewing the configuration View ConfigPage Main Menu Viewing the Configuration View Config View Configuration MessagesDisplay HW Page Page Scsi ID Rd Ahead Setting the Scsi ID Setting the BUS Parity CheckingSetting the Language Setting the Write Protect OptionSetting the Media Autoload Option Setting the Load Switch OptionSetting the Read Ahead Option Setting the CDE Curs OptionSetting the Busy Option Setting the Modsel RA OptionSetting the MM Spinup Option Clear NvRAM Diagnostics Selftests Clear Rtpm Diagnostics Menu Part SET the Internal Drive Serial Number SET Serial # Page DRV SN Test Mode Media Cartridge Handling Page Setting the Write Protection Switch Media Insertion and Removal Media Access DoorAffixing Labels LF 6600 Media Access Cartridge Insertion Cartridge Removal Manual Cartridge Release Mechanism Opening the BaseplatesRemoving the Bezel Back View of Bezel Retracting the Cartridge Media Loading Operator Maintenance Accessing DrivesTrim Panel Label Interlock Inspecting and Cleaning FAN and Blower Filters Replacing Fuses Media Cleaning Media Cleaning Using Cleaning KIT P/NPage Accessories PlasmonProduct Part Type Connector a Connector B Description Number Table below list the optional media cleaning accessories Page Appendix a German Translations / Übersetzungen INS DeutscheAbmessungen UND Gewicht TEMPERATUR, Luftfeuchtigkeit UND SeehöheStoss UND Vibration WechselstrombedarfWechselstromerdung KipptoleranzWärmeausstrahlung WarnhinweiseWiederverpacken DES LF Auspachen DER LFWarnung Installationsanforderungen ANSCHLUßÜBERPRÜFUNG Einschaltverfahren Einstellen DIE Deice IDHandhabung VON Datenträgerkassetten Auswechseln VON Sicherungen Warnung

LF 6602 specifications

The Plasmon LF 6602 is a state-of-the-art storage solution that is designed to meet the demands of high-capacity data management and retention. This innovative device serves as an optical archive system that combines reliability, longevity, and advanced technology to ensure the preservation of critical data over extended periods.

One of the key features of the LF 6602 is its impressive storage capacity. The system is capable of holding up to 60 terabytes of data, making it ideal for organizations with large datasets, such as healthcare providers, financial institutions, and media companies. This vast storage capacity not only allows for the archiving of traditional data but also supports the growing needs for multimedia and big data applications.

The Plasmon LF 6602 utilizes advanced optical disc technology, specifically the write-once, read-many (WORM) format. This ensures that once data is written to the optical disc, it cannot be altered or deleted, which provides a high level of data integrity and security. This feature is particularly beneficial for compliance regulations and legal requirements, as organizations can be assured that their archived data remains unmodified.

In terms of performance, the LF 6602 stands out with its fast retrieval times and efficient data access. The integrated software provides a user-friendly interface that enables quick searches and metadata management, allowing users to easily locate and access files as needed. The system supports multiple disc formats and can accommodate various data types, enhancing its versatility for different applications.

Durability is another hallmark of the Plasmon LF 6602. The optical discs are resistant to environmental factors such as temperature variations and humidity, which significantly reduces the risk of data loss due to physical degradation. The long lifespan of the media, often exceeding 50 years, ensures that data remains accessible for future generations.

Moreover, the LF 6602 is designed with scalability in mind. As data requirements grow, organizations can expand their storage systems seamlessly, integrating additional units without disrupting ongoing operations. This flexibility allows businesses to adapt to changing needs without incurring significant costs.

In summary, the Plasmon LF 6602 is a cutting-edge optical archive system characterized by its substantial storage capacity, data integrity through WORM technology, fast performance, high durability, and scalability. Its collective features make it an ideal choice for organizations looking to secure and manage their critical data efficiently and effectively.