Plasmon LF 6602 user manual Agency Compliance and Approval

Page 5

Radio/TV Interference (USA)

The information in this section applies only to units in use within the United States:

This equipment generates and uses radio frequency energy and, if not installed and used properly, that is, in strict accordance with the manufacturer's instruction, may cause interference to radio and television reception. It has been type tested and found to comply with the limits for a Class A computing device in accordance with the specifications of Part 15 of FCC Rules, which are designed to provide reasonable protection against such interference in a residential installation. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

reorient the receiving antenna

relocate the equipment away from the receiver

plug the equipment into a different outlet so that equipment and receiver are on different branch circuits.

If necessary, the user should consult the dealer or an experienced radio/television technician for additional suggestions. A pamphlet by the FCC ‘How to Identify and Resolve Radio-TV Interference Problems' is available from the US Government Printing Office, Washington, D.C., 20402, Stock No. 044-000-00345-4.

CDRH COMPLIANCE

LF 6602 contains a Class 1 Laser Product. This product complies with 21CFR Chapter 1, Subchapter J, applicable at date of manufacture.

CANADIAN EMI COMPLIANCE

Canadian Department of Communications standards require that the following statement appear in operating manuals for any digital apparatus imported into Canada:

This digital apparatus does not exceed the Class A limits for radio noise for digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications.

FRENCH TRANSLATION

Cet équipement digital ne dépasse pas les limites de la Classe A pour les interférences radioélectriques des systémes digitaux fixées par les Réglements concernant les Interférences Radioélectriques établis par le Ministére des Communications du Canada.

All Plasmon LMS products comply with the requirements of this standard.

Agency Compliance and Approval

For details on Agency Compliance and Approval refer to the LF 6602 Product Specification Manual.

Image 5
Contents Optical Disk Drive Page Page Warnung Agency Compliance and Approval Page Table of Contents Accessories Appendix a Related Publications ScopePage General Description Page Front Panel Drive CharacteristicsRear Panel Dimensions and Weight Temperature TEMPERATURE, Humidity and AltitudeShock and Vibration AC Power RequirementsTilt Range AC Power CordHeat Dissipation Particulate LimitsLocation of LF 6600 Warning Labels Page Unpacking the LF Unpacking and Repacking InstructionsUnpacking the LF Removing Banding Straps from LF EP005017 Positioning Ramp on Pallet Moving the Shuttle to the Home Position Repacking the LF Inspecting the LFShipping Bracket on Rear of LF 6602 Cabinet Manually Closing the Drives Baseplates Moving the Shuttle Assembly to the Shipping Position Page Page Installation Requirements InstallationScsi BUS Considerations Terminator LF 6602-to-Host Cable Connection Connecting Power and Scsi Cabling SINGLE-DEVICE Configuration Connector Verification MULTIPLE-DEVICE ConfigurationExtension Procedures LF 6602 Cabinet Configuration Showing Interlock Location Page Operating Instructions Controls and IndicatorsTEST/SELECT POWER-ON Procedure Modes of Operation Operating ModeOperating Condition DOC Display English French German Viewing the configuration View Config Configuration ModePage Main Menu View Configuration Messages Viewing the Configuration View ConfigDisplay HW Page Page Scsi ID Rd Ahead Setting the BUS Parity Checking Setting the Scsi IDSetting the Write Protect Option Setting the LanguageSetting the Load Switch Option Setting the Media Autoload OptionSetting the CDE Curs Option Setting the Read Ahead OptionSetting the Modsel RA Option Setting the Busy OptionSetting the MM Spinup Option Clear NvRAM Diagnostics Selftests Clear Rtpm Diagnostics Menu Part SET the Internal Drive Serial Number SET Serial # Page DRV SN Test Mode Media Cartridge Handling Page Setting the Write Protection Switch Affixing Labels Media Access DoorMedia Insertion and Removal LF 6600 Media Access Cartridge Insertion Cartridge Removal Opening the Baseplates Manual Cartridge Release MechanismRemoving the Bezel Back View of Bezel Retracting the Cartridge Media Loading Accessing Drives Operator MaintenanceTrim Panel Label Interlock Inspecting and Cleaning FAN and Blower Filters Replacing Fuses Media Cleaning Using Cleaning KIT P/N Media CleaningPage Plasmon AccessoriesProduct Part Type Connector a Connector B Description Number Table below list the optional media cleaning accessories Page German Translations / Übersetzungen INS Deutsche Appendix aAbmessungen UND Gewicht TEMPERATUR, Luftfeuchtigkeit UND SeehöheWechselstrombedarf Stoss UND VibrationKipptoleranz WechselstromerdungWärmeausstrahlung WarnhinweiseWarnung Auspachen DER LFWiederverpacken DES LF Installationsanforderungen ANSCHLUßÜBERPRÜFUNG Einstellen DIE Deice ID EinschaltverfahrenHandhabung VON Datenträgerkassetten Auswechseln VON Sicherungen Warnung

LF 6602 specifications

The Plasmon LF 6602 is a state-of-the-art storage solution that is designed to meet the demands of high-capacity data management and retention. This innovative device serves as an optical archive system that combines reliability, longevity, and advanced technology to ensure the preservation of critical data over extended periods.

One of the key features of the LF 6602 is its impressive storage capacity. The system is capable of holding up to 60 terabytes of data, making it ideal for organizations with large datasets, such as healthcare providers, financial institutions, and media companies. This vast storage capacity not only allows for the archiving of traditional data but also supports the growing needs for multimedia and big data applications.

The Plasmon LF 6602 utilizes advanced optical disc technology, specifically the write-once, read-many (WORM) format. This ensures that once data is written to the optical disc, it cannot be altered or deleted, which provides a high level of data integrity and security. This feature is particularly beneficial for compliance regulations and legal requirements, as organizations can be assured that their archived data remains unmodified.

In terms of performance, the LF 6602 stands out with its fast retrieval times and efficient data access. The integrated software provides a user-friendly interface that enables quick searches and metadata management, allowing users to easily locate and access files as needed. The system supports multiple disc formats and can accommodate various data types, enhancing its versatility for different applications.

Durability is another hallmark of the Plasmon LF 6602. The optical discs are resistant to environmental factors such as temperature variations and humidity, which significantly reduces the risk of data loss due to physical degradation. The long lifespan of the media, often exceeding 50 years, ensures that data remains accessible for future generations.

Moreover, the LF 6602 is designed with scalability in mind. As data requirements grow, organizations can expand their storage systems seamlessly, integrating additional units without disrupting ongoing operations. This flexibility allows businesses to adapt to changing needs without incurring significant costs.

In summary, the Plasmon LF 6602 is a cutting-edge optical archive system characterized by its substantial storage capacity, data integrity through WORM technology, fast performance, high durability, and scalability. Its collective features make it an ideal choice for organizations looking to secure and manage their critical data efficiently and effectively.