S E T U P M E N U O P T I O N S
Speaker Setup Page
Stereo | |
Front Speaker | Large |
Center Speaker | Small |
Rear Speaker | Small |
Subwoofer | Off |
Channel Delay |
|
1.
•Lt/Rt – Dolby Pro Logic II Left Total/Right Total. This mode is intended for use with two- channel Dolby Pro Logic II receivers. The center and surround channels are mixed into the two front channels according to the Lt/Rt matrix. A Dolby Pro Logic II receiver will decode the
•Stereo - This mode
•V. Surround - Virtual Surround. This mode creates a virtual surround effect from stereo or
•5.1CH – This mode enables 5.1ch decoded audio output. The number of actual output channels depends on the disc.
2.Front Speaker: To set the sound filtering control for the front speakers. The options are:
•Large – Choose if the front speakers are large. Bass frequencies are passed to the front speakers.
•Small – Choose if the front speakers are small. Bass frequencies are not passed to the front speakers to reduce possible distortion.
3.Center Speaker: To set the sound filtering control for the center speaker. The options are:
•Large – Choose if the center speaker is large. Bass frequencies are passed to the center speaker.
•Small – Choose if the center speaker is small. Bass frequencies are not passed to the center speaker to reduce possible distortion.
•Off – Choose if there is no center speaker.
4.Rear Speaker: To set the sound filtering control for the rear speakers. The options are:
•Large – Choose if the rear surround speakers are large. Bass frequencies are passed to the rear speakers.
•Small – Choose if the rear surround speakers are small. Bass frequencies are not passed to the rear speakers to reduce possible distortion.
•Off – Choose if there are no rear speakers.
5.Subwoofer: To enable/disable the subwoofer output. The options are:
•On – Subwoofer output is enabled.
•Off – Subwoofer output is disabled.
37