S E T U P M E N U O P T I O N S
•On – Pro Logic II processing is always on
•Off – No Pro Logic II processing
•Auto – Pro Logic II processing is on only when Dolby Pro Logic II encoded content is detected.
B.Mode: To set the processing mode of Pro Logic II. The options are:
•Music – The surround experience is tailored for
•Movie – Emphasis is given to the center channel as
•Pro Logic – This activates decoding and processing of the original Dolby Pro Logic processing with
•Auto – Automatically selects processing mode based on the input format
C.Panorama (Music mode only): Turns on/off panorama mode. When turned on, the front stereo audio is partially fed into the surround channels for an enveloping effect.
D.Dimension (Music mode only): Allows gradual adjustment of the sound field either towards the front or towards the rear. This is useful in setting a more even balance from all speakers with some rooms.
E.Center Width (Music mode only): To control the width of the center channel sound effect by blending the center speaker to the left and right speakers. As the level number increases, the center channel sound moves toward the left and right speakers.
5.Dolby Digital Setup: To configure the Dolby Digital decoder.
•Press the SELECT button to enter the Dolby Digital Setup page.
•Press the left ARROW button to exit the Dolby Digital Setup page.
A.Dual Mono: To choose the output for Dolby Digital discs encoded with two independent audio channels, such as bilingual programs. The options are:
•Stereo – Stereo output
•
•
•Mix Mono – Left and Right channels mixed to both Left and Right speakers.
B.Dynamic: To set the Dynamic Range Compression (DRC). DRC can smooth out the sonic peaks and valleys common with
6.Channel Trim: To set the volume of each individual channel.
41