DVI Connection
Rear Panel
| HDMI - DVI |
DVI | Cable |
|
DVI | Audio Cable |
Audio | |
Composite Video Cable
(Included, Optional)
Video In
Method 2 – DVI Connection to TV
•If your TV has a DVI input that supports HDCP, you can purchase an HDMI-DVI adapter cable to connect the DVD player to the TV. This connection method delivers digital video to the TV without any signal degradation. The HDMI video output of the OPPO DVD player presents the highest possible resolutions and video quality.
•Please use the Red/White audio cables to connect the FRONT/MIXED audio output of the DVD player to the TV. Make sure the audio cables are connected to the same input terminal group on the TV as the DVI input. Usually the input terminals are marked as “DVI Audio” or “PC Audio”. On some TVs you may need to use an RCA-3.5mm Mini-Jack adapter cable to connect the audio.
•You may connect the composite video or S-Video cable to the TV for trouble-shooting purpose, just in case there is a problem with DVI. However it is not recommended to use the composite video or S-Video as the primary method of video delivery to the TV, because using it will lose the advantage of video up-conversion and you will only get standard definition video.
NOTE
HDCP stands for High-bandwidth Digital Content Protection system. The HDMI output of the DVD player follows HDCP to encrypt the digital audio and video content. The TV needs to support HDCP so it can decrypt the content and properly display it.