OPPO Digital DV-983H user manual 12 ft

S E T U P M E N U O P T I O N S

•Small – Choose if the surround speakers are small. Bass frequencies are not passed to the surround speakers to reduce possible distortion.

•Off – Choose if there are no surround speakers.

5.S. Back Speaker: To set the sound filtering control for the surround back speakers. The sound filtering control for the surround back speakers always follow the surround speakers. It is not possible to set the surround and surround back speakers to different sizes. You may set the surround back speakers to “Off”, however if this is your speaker configuration you should really choose “5.1CH” as the “Down-mix” mode.

6.Subwoofer: To enable/disable the subwoofer output. The options are:

•On – Subwoofer output is enabled.

•Off – Subwoofer output is disabled.

7.Channel Delay: To set the delay time for the center, surround, surround back speakers and the subwoofer. The delay is to compensate for the audio propagation time difference caused by the placement of speakers.

Channel delay is generally not required since most A/V receivers have the capability to adjust channel delay and compensate for speaker distance differences. However if your receiver does not have such functions, you may adjust channel delay on the DVD player. Channel delay is only applied if the player is decoding multi-channel audio. If you use raw bit-stream audio output to your A/V receiver, the raw bit-stream audio is not adjusted for channel delay.

12 ft

•Press the up/down ARROW buttons to select the speaker to set the distance.

•Press the left/right ARROW buttons to adjust the distance.

•Press the SELECT button to confirm the settings and return to the Speaker Setup Page.

	L	C	R
	SW
Speaker Icons:		2	Distances:
			1
L - Left Front			1 - Listener to Front
			2 - Listener to Center
R - Right Front
			3 - Listener to Left Surround
C - Center
SW - Subwoofer	LS		RS
LS - Left Surround	3
RS - Right Surround	LSB	RSB
LSB - Left Surround Back
RSB - Right Surround Back

49