OPPO Digital DV-983H user manual Speaker Setup

S E T U P M E N U O P T I O N S

Speaker Setup Page

-- Speaker Setup Page --

Down-mix	7.1 CH
Front Speaker	Large
Center Speaker	Small
Surround Speaker	Small
S. Back Speaker	Small
Subwoofer	Off
Channel Delay
Channel Trim

1.Down-mix Mode: To set the audio down-mix mode for converting multi-channel audio into two- channel output. This setting affects the analog and HDMI audio outputs. The options are:

•Lt/Rt – Dolby Pro Logic II Left Total/Right Total. This mode is intended for use with two- channel Dolby Pro Logic II receivers. The center and surround channels are mixed into the two front channels according to the Lt/Rt matrix. A Dolby Pro Logic II receiver will decode the two-channel audio into surround audio.

•Stereo - This mode down-mixes decoded multi-channel (5.1ch) audio to 2-channel stereo output. For original stereo content the output will still be stereo. For original multi-channel content the surround and center channels will be mixed with the left and right front channels. Recommended for use with TV sets or stereo receiver/amplifiers.

•V. Surround - Virtual Surround. This mode creates a virtual surround effect from stereo or multi-channel audio contents.

•5.1CH – This mode enables 5.1ch decoded audio output. The number of actual output channels depends on the disc.

•7.1CH – This mode enables 7.1ch decoded audio output. The number of actual output channels depends on the disc. For 6.1ch contents, the left and right surround back speakers will both output the same surround back audio channel. 7.1CH output is available only through the analog audio output jacks.

2.Front Speaker: To set the sound filtering control for the front speakers. The options are:

•Large – Choose if the front speakers are large. Bass frequencies are passed to the front speakers.

•Small – Choose if the front speakers are small. Bass frequencies are not passed to the front speakers to reduce possible distortion.

3.Center Speaker: To set the sound filtering control for the center speaker. The options are:

•Large – Choose if the center speaker is large. Bass frequencies are passed to the center speaker.

•Small – Choose if the center speaker is small. Bass frequencies are not passed to the center speaker to reduce possible distortion.

•Off – Choose if there is no center speaker.

4.Surround Speaker: To set the sound filtering control for the surround speakers. The options are:

•Large – Choose if the surround speakers are large. Bass frequencies are passed to the surround speakers.

48