Setup
CONNECTING TO A SURROUND SOUND SYSTEM
2 CHANNEL DIGITAL STEREO SOUND
You can enjoy the dynamic sound of 2 Channel Digital Stereo by connecting this DVD player to a receiver equipped with a digital audio input and speaker system (right and left front speakers).
ENGLISH FRANÇAIS
From the DIGITAL OUT | |
(COAXIAL or OPTICAL) jacks | or optical cable |
From
Component Video /
Composite or SCART
To the digital input of an amplifier equipped with either
To
DEUTSCH NEDERLANDS ESPAÑOL ITALIANO PORTUGUÊS SVENSKA
TV
TO ENJOY DIGITAL SOUND
You need to select from the OSD drop down menu, Audio, Analogue Off, and Auto, 96K or 48K. If uncertain, select Auto from the Analogue Off menu. (Refer to Initial Setup Settings, Audio)
NOTES
•Switch the power off on the S570 before switching the
•Refer to the owner’s manual of your receiver as well.
•Before you connect the S570 to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections.
•Depending on your Digital sound decoder, the decode rate may be 96 or 48K.
•The output sound of the S570 has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening level. Otherwise, the speakers may be damaged by a sudden high volume sound.
•Turn off the receiver before you connect or disconnect the S570’s power cord. If you leave the receiver power on, the speakers may be damaged.
20