Selecting Video Display Mode, Selecting Scan Type

Setup

INITIAL SETUP SETTINGS

SELECTING VIDEO DISPLAY MODE

To select the appropriate display mode according to your TV set, one selects the SETUP menu form the remote. Choose ‘Video’, ‘Display Mode’, then the three choices that best fit your TV set.

1From the drop-down menu of the OSD screen, use the navigation arrows to select ‘Video’ and press ENTER on the remote.

2Use the navigation keys to select the desired ‘Display Mode’ and press ENTER on the remote

‘Widescreen 16:9’: Select when a wide-screen TV set is connected. Played in FULL size. (Setting the wide- screen TV to FULL mode is also necessary)

‘Letterbox 4:3’: The video material not formatted in the Pan & Scan style is played back in the letterbox style (black bands appear at top and bottom of screen).

‘Pan Scan 4:3’: Select when a conventional TV set is connected. The video material formatted in the Pan & Scan style is played back in that style (the left and right edges are cut off).

Cut Off

16:9 Wide

4:3 Letterbox

4:3 Panscan

NOTES

•Each screen shows an example when the video material for a widescreen is played. (This setting does not affect the video material for conventional size.)

•Progressive scan is available in NTSC with Component output only. Progressive scan is not available for PAL-Component or PAL-SCART output.

SELECTING SCAN TYPE

To select the appropriate scan type according to your TV set, one selects the ‘Setup’ menu form the remote. Choose ‘Video’, ‘Scan Type’, then the two choices that are available.

1From the drop-down menu of the OSD screen, use the navigation arrows to select ‘Video’ and press ENTER on the remote.

2Using the navigation keys, toggle between the two scan modes ‘Interlaced’ or ‘Progressive Scan’ and press ENTER on the remote

There are two modes for scanning depending on your TV set, one is Progressive scan, the other interlaced scan. Select the scan type that best suites your TV set.

NOTE

Progressive scan is available in NTSC with Component output only. Progressive scan is not available for

PAL-Component or PAL-SCART output.

SVENSKA PORTUGUÊS ITALIANO ESPAÑOL NEDERLANDS DEUTSCH FRANÇAIS ENGLISH