Using the L53’S AM/FM Radio

Operation

The L53’s internal AM/FM tuner offers very high quality sound from radio broadcasts. Note that reception and sound quality will always be dependent to a degree on the type of antenna(s) used, as well as proximity to the broadcast origin, geography, and weather conditions.

ABOUT ANTENNAS

The supplied ribbon -wire FM antenna can be connected to the rear-panel FM-antenna input using the ‘balun’ included adaptor, and should be fully extended to form a “T”. This folded-dipole antenna will usually work best oriented vertically, with the arms of its “T” full outstretched and arranged perpendicular to the origin of the desired broadcast. There are no ‘rules,’ however, and experimenting freely with antenna placement and orientation may yield the clearest sound and lowest background noise. In areas of poor FM reception, an exterior FM antenna can improve performance dramatically. If radio listening is important to you, consider consulting an antenna installation professional to optimise your system.

The supplied AM ‘loop’ antenna will usually provide adequate reception. However, an exterior AM antenna can be used to improve reception; consult an antenna professional for more information.

SELECTING THE RADIO

Press the “INPUT SELECT” button on the L53 front panel, the HTR L53’s orange “TUNER” (the numeric 5 button), or the yellow “AM” and “FM” buttons to select the receiver’s radio mode. Each subsequent press of either button will toggle the unit between its FM and AM bands.

TUNING STATIONS

Press “INPUT SELECT” on the front panel to select FM or AM frequencies. Press and hold “SCAN TUNE ” for more than 2 seconds to search up or down; the L53’s tuner will stop at the next

sufficiently strong signal it encounters. Pressing the “SCAN TUNE ” buttons momentarily during the search process will stop the search.

NOTE

•As well as from the front panel, one can perform the Scan function from the HTR L53 remote using

the “TUNE ” buttons.

SETTING RADIO PRESETS

The L53 can store as many as 60 of your favourite radio stations for immediate recall; 30 FM stations and 30 AM. To store a radio preset, first tune the desired frequency (see above), then press the front panel

“MEMORY” button. Press the “PRESET , ” button to select the preset number. Then press the “MEMORY” button once again.

NOTE

•The Radio Presets must be stored from the front panel; this setup function is not accessible from the HTR L53 remote.

SELECTING RADIO PRESETS

Press “PRESET ” on the front panel to step up or down between presets; press and hold “PRESET

” to scroll continuously up or down. The HTR L53 remote’s “PRESET ” buttons work similarly.

DELETING A STORED PRESET

You can empty a preset by deleting the stored information.

•Select the preset to be emptied.

•Simultaneously press the front panel buttons DISPLAY and SETUP/MEMORY in the following order.

•First press the DISPLAY button and hold it in. While holding in the DISPLAY button press the SETUP/MEMORY button for about one half second, then release the SETUP/MEMORY button.

•Release the DISPLAY button.

•The preset will then be deleted and "DELETED" scrolls on the display.

NOTE

• Empty presets will be skipped during preset tuning.

AM Loop Antenna

SVENSKA PORTUGUÊS ITALIANO ESPAÑOL NEDERLANDS DEUTSCH FRANÇAIS ENGLISH

L 53 specifications

The NAD L 53 is a high-performance surround sound receiver that exemplifies the brand's commitment to delivering exceptional audio quality and advanced technology. Known for its robust design and impressive feature set, the L 53 is designed for audiophiles and home theater enthusiasts looking to enhance their listening experience.

One of the standout features of the NAD L 53 is its power and versatility. It is equipped with a powerful amplifier that delivers clean and dynamic sound across all channels, making it perfect for both music and movie playback. The L 53 boasts a total power output of 50 watts per channel into 8 ohms, ensuring that it can drive a variety of speaker configurations with ease. This capacity allows the receiver to fill larger rooms with rich, immersive audio.

The L 53 utilizes NAD's proprietary Direct Digital Technology, which enables precise audio reproduction without the signal distortion that often plagues traditional analog circuits. This design choice allows for a more transparent sound, offering listeners a nuanced and detailed audio experience. The receiver also supports high-definition audio formats, such as Dolby TrueHD and DTS-HD Master Audio, which further enhances the clarity and quality of soundtracks in movies and music.

Connectivity is another strong point of the NAD L 53. With multiple HDMI inputs, users can connect their Blu-ray players, gaming consoles, and other high-definition devices with ease. The receiver also features USB inputs for digital audio playback and built-in Bluetooth for wireless streaming of music from smartphones and tablets. Additionally, the L 53 is equipped with a phono input, catering to vinyl enthusiasts who wish to enjoy their record collections.

The NAD L 53 is designed with user-friendliness in mind. Its intuitive interface and remote control make navigating through various settings and features straightforward. The receiver also includes advanced room correction technology, which analyzes the acoustics of the listening environment and optimizes the speaker settings for improved sound quality.

In summary, the NAD L 53 combines powerful amplification, advanced digital technology, and versatile connectivity options to create a receiver that meets the demands of modern home entertainment systems. Whether for cinematic experiences or music playback, the L 53 stands out as a premium choice for those seeking high-fidelity sound in their home theater setup. Its robust construction and innovative features ensure that it remains a relevant and compelling option for years to come.