HDMI colour space
This setting controls the type of video (the colour space) given out over the HDMI connection.
Auto | The colour space will be set appropriately for the connected display. |
| This is the recommended setting if you are connecting the DV137 to an |
| HDMI- or |
|
|
YUV | The HDMI connection carries Y, Pb, Pr (YUV) component video. |
|
|
RGB (video) | The HDMI connection carries RGB video with standard video levels. |
|
|
RGB (PC) | The HDMI connection carries RGB video with PC |
|
|
This setting can be changed only if ‘Main video output’ is set to ‘HDMI’. This setting has no effect on the analogue video outputs.
English
Analogue resolution
Allows selection of interlaced or
The video output will always be interlaced (standard definition video). Use this | |
| setting if your display device does not support progressive scan. |
|
|
SD | The component- and |
Progressive | both PAL and NTSC discs. Use this setting only if your display device supports |
| progressive scan in both PAL and NTSC formats. |
|
|
This setting can be changed only if ‘Main video output’ is set to ‘Analogue’.
Note that the video on the component video connections always matches that on the HDMI link, so changing this value when in ‘Analogue’ mode will change the HDMI output too.
The
Analogue NTSC black (Pedestal)
This setting controls the ‘pedestal’ signal or black level when the NTSC video standard is used.
0 IRE | This removes the pedestal from NTSC video. This setting should be used in Japan, |
| and also if you are using RGB video, whatever the country. |
|
|
7.5 IRE | This is the standard pedestal level that should be used in all countries that use |
| NTSC video, with the exception of Japan. |
|
|
Not all displays support progressive scan. If you
enable progressive scan
accidentally and your
display does not support
it, you may be unable
to view the picture from
the DVD player, including
the
required to change the
video settings back. If this happens, use a composite or SCART video connection (which always carry interlaced video) between the DV137 and your display device in order to be able to see the
This setting can be changed only if ‘Main video output’ is set to ‘Analogue’. Note that this setting has no effect on PAL, progressive scan or HDMI outputs.
DV137