Setting the Scroll
This CD player can scroll the disc and track names recorded on CD- TEXT discs, as well as text information of MP3/WMA/AAC files, folder names, tags, HD Radio and SAT Radio.
Setting item: AUTO SCROLL
Setting content: OFF / ON
ON: Turns on the AUTO scroll mode. Scroll display is repeated as long as the mode is turned on.
OFF: Turns off the AUTO scroll mode.
Scroll display is done once as a track is changed (only when the scroll display cannot appear entirely).
•The display scrolls on the unit when the screen is filled up.
•Scroll display of the song, artist and album name is enabled when iPod is connected.
Changing the Russian Font
Two type of font can be selected.
Setting item: LANGUAGE SELECT
Setting content: MODE1 / MODE2
MODE1: Usual font display
MODE2: Russian font display
Adjusting the Dimmer of Button Lighting at Night
You can adjust the brightness of the button lighting at night with the dimmer.
Setting item: LED DIMMER LEVEL
Setting level:
•The adjustment is available when ON or AUTO is set in “Setting the Brightness of the Backlighting” (page 39).
•The adjusted brightness is reflected in the button lighting.
SYSTEM Setup
System Setup Operation
To display the System mode screen:
To watch a video source, your vehicle must be parked with the ignition key in the ACC or ON position. To do this, follow the procedure below.
1Brake to bring your vehicle to a complete stop at a safe location. Engage the parking brake.
2Keep pushing the foot brake and release the parking brake once then engage it again.
3When the parking brake is engaged for the second time, release the foot brake.
•For automatic transmission vehicles, place the transmission lever in the Park position.
Now, the locking system for the System mode operation has been released. Engaging the parking brake can reactivate the System mode, as long as the car's ignition has not been turned off. It is not necessary to repeat the above procedure (1 through 3), of “To display the System mode screen.”
Each time the ignition is turned OFF, perform the procedure of “To display the System mode screen.”
The following steps 1 to 5 are common operations to each “Setting item” of SYSTEM Setup. Refer to each section for details.
1 Touch [SETUP] on the main source screen.
The SETUP selection screen is displayed.
2 Touch [ 
] of SYSTEM SETUP.
The SYSTEM setup screen appears.
3 Touch [
] or [
] of the desired item to change its setting.
Setting items:
IN INT. MUTE / IN INT. ICON / REMOTE SENSOR*1 / NAV. IN / NAV. MIX*2 / AUX IN / AUX IN LEVEL*3 / USB ADAPTER / CAMERA IN / AUX OUT / Bluetooth IN /
VISUAL KEY / SUBW. OUT*4 / OPTICAL OUT
*1 When ON is set in “Setting the Picture/Sound Output” (page 38), the item is displayed.
*2 When ON is set in “Setting the Navigation Mode” (page 37), the item is displayed.
*3 When ON is set in “Setting the AUX Mode” (page 37), these items are displayed.
*4 Not displayed when an extarnal audio processor is connected.
4 Touch [RETURN] to return to the previous screen.
•Immediately after changing the settings of System Mode (While the system is writing data automatically) do not turn the ignition key (engine key) to OFF.
Otherwise, the settings may not be changed.