Adjusting Sound
The unit includes a function to create better sound in a car enviroment. The BassEngine menu lets you select standard adjustments as well as
5.1surround sound settings. If the unit is connected to an optional external processor, the adjustment will be made by A.PROCESSOR. Adjustment can only be made after you have brought your vehicle to a complete stop in a safe location.
To display the BassEngine or Audio processor mode screen:
To watch a video source, your vehicle must be parked with the ignition key in the ACC or ON position. To do this, follow the procedure below.
1Bring your vehicle to a complete stop at a safe location. Engage the parking brake.
2Keep pushing the foot brake and release the parking brake once then engage it again.
3When the parking brake is engaged for the second time, release the foot brake.
•For automatic transmission vehicles, place the transmission lever in the Park position.
Now, the locking system for the BassEngine or Audio processor mode operation has been released. Engaging the parking brake can reactivate the BassEngine or Audio processor mode, as long as the car’s ignition has not been turned off. It is not necessary to repeat the above procedure (1 through 3), of “To display the BassEngine or Audio processor mode screen.”
Each time the ignition is turned OFF, perform the procedure of “To display the BassEngine or Audio processor mode screen.”
BassEngine Operation
BassEngine Operation
: the following settings can be made for standard BassEngine on the unit.
•The settings can be made by the BassEngine only when in multi- channel playback. However, the front/rear HPF setting for the X- OVER adjustment can be made even when not in
Following Steps 1 to 5 describe the common procedures for operating the BassEngine setting function. For details of the setting function items, refer to descriptions of respective items.
1 Check the Defeat mode is off (page 27), and then touch [SETUP] on the main source screen.
The SETUP selection screen is displayed.
2 | Touch [ | ] of AUDIO. |
| The AUDIO setup screen appears. | |
3 | Touch [ | ] of BassEngine. |
| The BassEngine list screen appears. | |
4 | Touch [ | ] etc., of the desired item to change its |
| setting. |
|
Setting items :
SPEAKER SELECT / MULTH CH SETUP / SPEAKER SETUP / BASS SOUND CONT. / USER PRESET
5 Touch [RETURN] to return to the previous screen.
External Audio Processor Operation
External Audio Processor (Optional)
When an external audio processor is connected to this unit, you can operate it from this unit. Some audio processors may not be operated. In this case, operate them in the connected product. Explanations below is the case when
•The adjustments or settings performed on the connected audio processor cannot be operated properly from this unit.
•The setting “Setting the Speakers”, “Setting Bass Sound Control”, and “Graphic Equalizer Adjustments” are not available if the MRA- D550 is connected. Additionally, if the
•This unit cannot be connected to the