Alpine IVA-D105 owner manual Tuning in to Categorized Programs, Changing the Display, 54-EN

Tuning in to Categorized Programs

You can listen to programs categorized to the same group one after another.

In the XM or SIRIUS mode, touch CATEGORY [] or [] to select a desired category.

The first channel of the selected category is tuned.

•If the desired category program is not found, the “--------” is displayed for 2 seconds, then the receiving program is restored.

Changing the Display

Text information, such as the channel name, artist name/feature, and song/program title, is available with each XM or SIRIUS channel. The unit can display this text information as explained below.

Touch [INFO.] on the XM or SIRIUS mode main screen.

Each time you touch this button, the display changes as shown below.

XM mode:

Information	*	Auxiliary Data
display		Field

SIRIUS mode:

Checking the SAT Radio ID Number

A unique Radio ID number is required to subscribe to SAT Radio programming. Each third party XM or SIRIUS radio comes with this number.

XM Radio:

This number is an 8 character alphanumeric number. It is printed on a label found on the SAT Receiver.

SIRIUS Radio:

This number is a 12-digit numeric number. It is printed on a label found on the SAT Receiver.

It can also be displayed on the screen of the IVA-D105 in the following way.

1 While receiving SAT Radio, touch [ NO.] or [NO. ] to select channel ‘0’ for XM and channel “255” for SIRIUS.

The unit display the ID number.

2 The unit displays the ID number.

3 To cancel the ID number display, change the channel.

•You cannot use “O,” “S,” “ I,” or “F” for the ID Number. (XM radio Receiver only)

•You can check the ID number printed on a label on your third party, SAT Radio Receiver package.

	Storing Channel Presets
	1 Touch [PAGE1/3] after selecting a desired band.
* Channel name, category, title name, etc., are displayed in one screen.
	The Function Guide is switched.

2 Touch and hold any one of the preset buttons [P-1] through [P-6] for at least 2 seconds. The selected channel is stored.

3 Repeat the procedure to store up to 5 other channels onto the same band.

To use this procedure for other bands, simply select the desired band and repeat the procedure.

A total of 18 channels can be stored in the preset memory (6 channels for each band; XM1, XM2 and XM3 or SIRIUS1, SIRIUS2 and SIRIUS3 ).

• If you store a channel in a preset already being used, the current channel will be replaced with the new one.

Receiving Stored Channels

1 Touch [PAGE1/3] after selecting a desired band.

The Function Guide is switched.

2 Touch any one of the preset buttons [P-1] through

[P-6] that has your desired satellite channel in memory.

54-EN