EN | value 1.000 m). This value can be adjusted to the | |
desired stake out distance. | ||
| ||
| The value is increased. |
The value is reduced.
Holding the button down accelerates the speed at which the value changes.
1x briefly: starts continuous measurement.
In intermediate line 1, the set distance or the next appropriate multiple thereof is displayed.
In the summary row, the distance to the next appro- priate stake out point is displayed.
When approaching a stakeout point (to less than
0.10m (4 in)), the instrument starts to beep. When the point is reached, the beep sound changes and intermediate line 1 starts to flash.
1x briefly: distance measurement is interrupted and the instrument switches back to individual
distance measuring mode.
Historical memory
1x briefly: the 
symbol and the last measured value are displayed.
Use the "+" or
Using stored values in functions
Using added distances in area functions (e.g. wall surfaces or painters):
Adding distances (see additions / subtractions)
Call up area function to e.g. measure the height of a room.
1x briefly: calls up the historical memory and to possibly search for the correct value.
1x long: the value is entered into the function and the result of the function (e.g. area) is displayed.
Timer (self-triggering)
1x long: The 
symbol is displayed.
The timer is preset to 5 seconds.
The value is increased.
The value is reduced.
Holding the buttons down increases the rate of change of the values.
The countdown starts automatically (if the laser is activated) and then triggers the measurement.
Functions
8
Leica DISTO™ D2 762960 en