Leica 762960 manual Laser classification, Labelling, Class 2 Laser Products

Page 14

Laser classification

The Leica DISTO™ produces a visible laser beam which emerges from the front of the instrument. See drawing {K}.

The product is a Class 2 Laser Product in accordance with:

IEC60825-1 : 2007 "Radiation safety of laser products"

Class 2 Laser Products:

Do not stare into the beam or direct it unnecessarily at other persons. Eye protection is normally afforded by aversion responses including the blink reflex.

￿ WARNING

Looking directly into the laser beam with optical aids (e.g. binoculars, telescopes) can be hazardous.

Precautions:

Do not look directly into the beam with optical aids.

￿CAUTION:

Looking into the laser beam may be hazardous

to the eyes.

Precautions:

Do not stare into beam. Do not look into the laser beam. Make sure the laser is aimed above or below eye level (particularly with fixed installations, in machines, etc.).

Labelling

Laser Radiation

Do not stare into the beam

Laser class 2

acc. IEC 60825-1:2007

Maximum radiant power *: <1mW

Emitted wavelength: 620-690nm

Beam divergence

0.16 x 0.6 mrad

Impulse duration

1 x 10 -9s

 

 

 

 

 

 

 

 

For the position of the type plate see drawing {J}.

EN

Leica DISTO™ D2 762960 en

11

Appendix

Image 14
Contents Leica Disto D2 Page Page Intended Use Symbols used in this manualSymbols used in this manual Permitted usesResponsibilities OverviewLimits of use KeyboardStart up OperationReference Setting Switching on/offSetting the instrument CLEAR-KeyMeasuring FunctionsIndirect Measurement Volume functionArea function FunctionsStake out function Timer self-triggering Historical memoryAppendix Switching off the beepTechnical Specifications Display NoticesElectromagnetic Compatibility EMC FCC statement applic. in U.SClass 2 Laser Products Laser classificationLabelling Warranty Disposal