Display
See drawing {B}
1Laser "ON"
2Reference (front/rear/end piece)
3 Pythagoras
4 Timer
5 Historical memory
6 Area/volume
7 Battery status
8 Units with exponents (2/3)
9 Intermediate line 2
10 Intermediate line 1
11 Main targets
12 min / max display
13 Info symbol
Start up
Inserting / Replacing Batteries
1Remove battery compartment lid.
See drawing {C}.
2Insert batteries, observing correct polarity.
3 Close the battery compartment.
• Replace the batteries when the symbol 
flashes permanently in the display.
) | Only use alkaline batteries. |
) | If the instrument will not be used for a long |
time, remove the batteries as a protection against corrosion.
Operation | EN |
Measuring Conditions
Range
Range is limited to 60 m (197 ft).
At night or dusk and if the target is in shadow the measuring range without target plate is increased. Use a target plate to increase the measurement range during daylight, or if the target has poor reflec- tion properties!
Target Surfaces
CAUTION:Measuring errors can occur when measuring toward colourless liquids (e.g. water) or dust free glass, Styrofoam or similar
Hazards of Use
CAUTION:
Watch out for erroneous distance measure-
ments if the instrument is defective or if it has been dropped or has been misused or modified.
Precautions:
Carry out periodic test measurements.
Particularly after the instrument has been subject to
Leica DISTO™ D2 762960 en
3