Samsung Colour TV/VCR manual Storing the Stations Automatically depending on the model, Input

Page 13

Storing the Stations Automatically (depending on the model)

You can scan the frequency ranges available on your television and in your country and store all the stations found automatically. If you have a dual tuner model, the stations are stored for both tuners at the same time (television and VCR).

The stations are stored in the order in which they appear in the frequency bands. It is possible that the automatically allocated programme numbers may not correspond to those by which you wish to identify the stations. If this is the case, you can then sort them manually and clear any stations that you do not wish to watch (see page 14 for further details).

➢If you wish to receive a scrambled television station, check that the decoder is switched off. Switch it back on once you have finished storing the stations.

1Press MENU ( ).

Result: The television menu, illustrated opposite, is displayed.

2Select the TUNE option by pressing P ▼, followed by the + button.

Result: The tuning menu is displayed.

➢The TUNE option is not available if:

◆The AV input is selected; press INPUT ( ) to select an ordinary station

◆A video cassette is playing; stop the cassette

3Select the AUTO TUNE option by pressing P ▼, followed by the + button.

Result: The AUTO TUNE menu is displayed with the COUNTRY is selected.

4Select your country by pressing the +, The following countries are

available: AUSTRIA - BELGIUM - CROATIA - DENMARK - FINLAND - FRANCE - GERMANY - ICELAND - IRELAND - ITALY - NETHERLANDS - NORWAY - POLAND - SPAIN - SWEDEN - SWITZERLAND - TURKEY - UK.

5Select the AUTO TUNE option by pressing P ▼, followed by the + button.

Result: The scan starts and the stations are stored in the order in which they are found, starting with programme 00. The scan stops automatically once all the frequency bands have been scanned.

➢You can stop the scan at any time by pressing MENU ( ).

When the scan stops before more than two stations are stored, many of the stored stations before the scan is done remain “stored”.

INPUT

P 02

MENU

PICTURE

TUNE

SETUP

--:--

ADJUST

SELECT

EXIT

TUNE

MANUAL TUNE

AUTO TUNE

ADJUST

SELECT

EXIT

AUTO TUNE

 

 

COUNTRY

: UK

 

AUTO TUNE

:

 

ADJUST

SELECT

EXIT

P 1

 

 

FREQUENCY

: 225.00 MHz

 

STOP

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents
Owner’s Instructions Risk of Electric Shock Do not Open Safety InstructionsContents Press Hold down SymbolsConnecting a Decoder Connecting the Aerial or Cable Television NetworkScart cable Connecting Other Video EquipmentFront or Side of the Television Depending on the model Switching Your Combi Vision On and Off Inserting the Batteries in the Remote ControlAutomatic Degaussing to Remove Colour Patches Becoming Familiar with the Remote ControlCircuits to operate properly Magnetic fieldsBecoming Familiar with the Menu System Selecting a Menu Option List of languages displayed may change without notice Choosing Your LanguageSetting the Date and Time Input Storing the Stations Automatically depending on the modelIf you wish to Then Sorting and/or Clearing the Stored ChannelsChanging Stations To switch PressSelecting a Station Numbered Ten or Over If you Storing the Stations Manually3DB LNA option to OFF Adjusting the Picture Setting Adjusting the Picture and Storing Your PreferencesSwitching the Sound Off Temporarily Mute Adjusting the VolumeSetting the Combi Vision to Switch On Automatically If the timer is Setting the Sleep TimerDisplaying Information on the Screen Type Recording Time Cassette Types and Recording Speeds OptionPlaying a Cassette Selecting the Video Standard depending on the modelTo play back any pre-recorded cassette, proceed as follows Adjusting the Picture Quality during Playback Using the Crystal PlayBackPress Crystal PB to compensate a poor rental tape Normal, Sharp, SoftRewinding and Fast-forwarding a Cassette Selecting the Type of Cassette TapeThen press Playing a Sequence Frame by Frame Recording a Programme Directly Recording a Programme with Automatic Stop Before presetting your VCR unit UsingTo record a programme If the day entered is ThenMore times to select Setting the VCR Unit to Record Programme Automatically Cancelling a Preset Recording Checking a Preset RecordingYou can check your preset recordings 00000 Using the Tape Counter to Search for a SequenceScanning the Index Markings Using the Indexes to Search for a SequenceNext SeqOFF Repeating Playback of a Sequence or CassetteContents Teletext Feature depending on the modelSelecting Display Options Displaying the Teletext ScreenSelecting a Teletext Storing Teletext Pages You can recall any of the 32 pages stored in the List modeRecalling a Stored Teletext Remote Control Front Panel Using the Buttons on the Front PanelLocking the Front Panel Cleaning the Video Heads Connecting EarphonesProblem Explanation/Solution Before Contacting the After-sales ServiceTelevision Part Technical SpecificationsImportant Notice Wiring the Mains Power Supply Plug UK OnlyPin Signal Scart Connector WiringPAL B/G Using Your Combi Vision AbroadTuner GlossaryChannel Broadcasts or programmesButtons and markings are subject to change Front View of Your Combi Vision depending on the modelRear View of Your Combi Vision Next Teletext Control Buttons Teletext Option OnlyMenu Infrared Remote Control All Functions Except TeletextMemo Memo Electronics
Related manuals
Manual 56 pages 24.89 Kb