
Connecting the Aerial or Cable Television Network
To view television channels correctly, a signal must be received by the set from one of the following sources:
◆An outdoor aerial
◆ A cable television network
Plug the aerial or cable network input cable into the socket at the bottom of the television’s rear panel.
➢If you wish to subscribe to a cable network, contact your
local dealer.
or
Cable Television Network
REAR OF THE
TELEVISION
Connecting a Decoder
This COMBI VISION is fully equipped to receive scrambled Pay TV broadcasts.
Example: Premiere broadcasts.
➢If you wish to connect both a decoder and an external VCR to the SCART connector, you must plug:
◆The decoder into the VCR
◆The VCR into the COMBI VISION (refer to “Connecting Other Video Equipment” on the following page for further details)
1Plug the SCART cable supplied with the decoder into the SCART connector on the rear of the set.
2Plug the other end into the decoder.
REAR OF THE TELEVISION |
SCART |
Decoder |
5 |