Samsung Colour TV/VCR manual Recording a Programme Directly

Page 28

Recording a Programme Directly

		INPUT
			Pre.
V.MENU		MUTE
	P
	MENU
	P
GB		P.STD
DISPLAY		P.STD
REC	EJECT	P/S	CRYSTAL PB
	INDEX	MEMORY	SLEEP

Before recording a programme, you must have stored the corresponding channel. If you have not done so, refer to page 13 or 16 for more details.

➢◆ If you have 1 tuner model, you cannot record one programme while watching another.

◆If you have dual tuner model, you can record one programme while watching another.

1Select:

◆The TV station to be recorded using the P ▲ or ▼ buttons or

◆The AV source using the INPUT ( ) button for a satellite tuner or external video source

Result: The channel number is displayed and the programme can be seen on the television.

2Insert the cassette on which the programme is to be recorded, with the window visible and the safety tab intact or the opening covered with adhesive tape.

3Hold REC ( ) down for at least two seconds to start recording.

Result: The record indicator appears on the screen. An index is recorded on the tape (see page 36).

During recording you can also press DISPLAY ( ) to display the number of the programme being recorded and the remaining time on the cassette.

4

To...

Then press...

Stop recording temporarily (to avoid recording	P/S (			).
Stop recording temporarily (to avoid recording	P/S (			).
TV spots or to change channels for example)

Start recording again	P/S (			) or REC ( ).



Stop recording completely	STOP (					) once.

➢If the VCR is left in Pause mode for more than ten minutes, recording will be stopped automatically to protect the heads and the cassette.

➢If the cassette is ejected when you start recording, check that the safety tab is intact or the opening is covered with adhesive tape.

If you reach the end of the tape while recording, the cassette rewinds automatically.

28

Image 28

Contents Owner’s Instructions Safety Instructions Risk of Electric Shock Do not OpenContents Symbols Press Hold downConnecting the Aerial or Cable Television Network Connecting a DecoderScart cable Connecting Other Video EquipmentFront or Side of the Television Depending on the model Inserting the Batteries in the Remote Control Switching Your Combi Vision On and OffBecoming Familiar with the Remote Control Automatic Degaussing to Remove Colour PatchesCircuits to operate properly Magnetic fieldsBecoming Familiar with the Menu System Selecting a Menu Option Choosing Your Language List of languages displayed may change without noticeSetting the Date and Time Storing the Stations Automatically depending on the model InputSorting and/or Clearing the Stored Channels If you wish to ThenChanging Stations To switch PressSelecting a Station Numbered Ten or Over Storing the Stations Manually If you3DB LNA option to OFF Adjusting the Picture and Storing Your Preferences Adjusting the Picture SettingAdjusting the Volume Switching the Sound Off Temporarily MuteSetting the Combi Vision to Switch On Automatically Setting the Sleep Timer If the timer isDisplaying Information on the Screen Cassette Types and Recording Speeds Option Type Recording TimePlaying a Cassette Selecting the Video Standard depending on the modelTo play back any pre-recorded cassette, proceed as follows Using the Crystal PlayBack Adjusting the Picture Quality during PlaybackPress Crystal PB to compensate a poor rental tape Normal, Sharp, SoftRewinding and Fast-forwarding a Cassette Selecting the Type of Cassette TapeThen press Playing a Sequence Frame by Frame Recording a Programme Directly Recording a Programme with Automatic Stop Using Before presetting your VCR unitTo record a programme If the day entered is ThenMore times to select Setting the VCR Unit to Record Programme Automatically Cancelling a Preset Recording Checking a Preset RecordingYou can check your preset recordings Using the Tape Counter to Search for a Sequence 00000Using the Indexes to Search for a Sequence Scanning the Index MarkingsNext SeqRepeating Playback of a Sequence or Cassette OFFTeletext Feature depending on the model ContentsDisplaying the Teletext Screen Selecting Display OptionsSelecting a Teletext Storing Teletext Pages You can recall any of the 32 pages stored in the List modeRecalling a Stored Teletext Remote Control Front Panel Using the Buttons on the Front PanelLocking the Front Panel Connecting Earphones Cleaning the Video HeadsBefore Contacting the After-sales Service Problem Explanation/SolutionTechnical Specifications Television PartWiring the Mains Power Supply Plug UK Only Important NoticeScart Connector Wiring Pin SignalUsing Your Combi Vision Abroad PAL B/GGlossary TunerChannel Broadcasts or programmesFront View of Your Combi Vision depending on the model Buttons and markings are subject to changeRear View of Your Combi Vision Teletext Control Buttons Teletext Option Only NextInfrared Remote Control All Functions Except Teletext MenuMemo Memo Electronics