Connecting the DVD player—Continued
Video Output/Video Setting Matrix
The following matrix shows how the video outputs work in relation to the various video settings.
|
|
| HDMI Output Setting (page 27) |
|
| ||
| Setting |
| On (default) |
|
| Off | |
|
|
|
|
| |||
|
|
|
|
|
|
| |
|
| HD Resolution setting (page 43) | Progressive Setting (page 43) | ||||
Video output |
| Auto | 480p/576p | 720p, 1080i | Progressive |
| Interlaced |
|
| (default) |
| ||||
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
HDMI |
| ✓ | ✓ | ✓*3 | No output |
| No output |
Component |
| ✓*1 | ✓*2 | No output | ✓*2 |
| ✓ |
|
| ✓*1 | ✓ | No output | ✓ |
| ✓ |
Composite |
| ✓*1 | ✓ | No output | ✓ |
| ✓ |
*1 Depending on the native resolution of your TV, you may get no picture.
*2 If your TV doesn’t support progressive scanning, you’ll get no picture.
*3 If your TV doesn’t support the HD Resolution settings of 720p and 1080i, you’ll get no picture.
Audio Output/Audio Setting Matrixes
■Digital Audio Output/Audio Setting Matrix
The following matrix shows how the digital audio outputs work in relation to the Digital/HDMI Audio Out setting.
Setting | Digital/HDMI Audio Out setting (page 48) | ||
Digital | All (default)*a | PCM*a | Off |
audio output |
|
|
|
HDMI | ✓ | ✓*b | No output |
Digital (optical & coaxial) | ✓ | ✓*b | No output |
Audio from SACDs is not output by the HDMI OUT or optical or coaxial digital audio outputs. It’s only output by the analog audio outputs. Audio from the multichannel area of a
*a | If your TV or amp doesn’t support higher sampling rates, set the Linear PCM Out setting to Down Sample On (page 48). |
*b | Dolby Digital and DTS sources will be converted to PCM. If your TV or amp doesn’t support Dolby Digital and DTS, choose this |
| option. |
■Analog Audio Output/Audio Setting Matrix
The following matrix shows the recommended audio settings for each analog audio output.
Setting | Speaker Configuration (page 48) | SACD Audio Setup (page 49) | ||
5.1 channel (default): | 2 channel: |
|
| |
|
|
| ||
| Subwoofer: On | Subwoofer: Off |
|
|
Analog audio | Front: Small | Front: Large | DSD (default) | PCM |
Center: Small | Center: Off |
|
| |
output |
|
| ||
Surround: Small | Surround: Off |
|
| |
|
|
| ||
|
| ✓*c |
| ✓ |
Multichannel | ✓ |
| ✓ |
|
*c If your TV or multichannel amp has a Dolby Pro Logic decoder built in, by setting the Downmix Setting (page 50) to Lt/Rt, | ||||
multichannel sources can be down mixed and output as an Lt/Rt mix.
19