Integra DPS-6.7 instruction manual Initial Setup, First Time Setup, Enter

DPS-6.7_En.book Page 27 Monday, July 31, 2006 3:12 PM

Initial Setup

This chapter explains the settings you need to make the very first time the DVD player is turned on.

Enter

/

2

Remote

controller

Use the Up and Down []/[ ] buttons to select “On” or “Off” for “HDMI Output Setting.”

Select “On” to use the HDMI output.

Initial Setup

TV Shape	: 4:3 Letter box
HDMI Output Setting
	✔	On
On-Screen Language		Off

The “On-Screen Language” menu appears next.

First Time Setup

The very first time you turn on the DVD player, the Ini- tial Setup menu appears onscreen.

Initial Setup

TV Shape

HDMI Output Setting	✔ 4:3 Letter box
	4:3 Pan Scan
On-Screen Language	16:9 Widescreen
	16:9 Compressed

3

Remote

controller

Use the Up and Down []/[ ] buttons to select a language, and then press [Enter].

See page 50 for more information on the language options.

Initial Setup

TV Shape	: 4:3 Letter box
HDMI Output Setting	: On
On-Screen Language
	✔ English
	Français
	Español
	Deutsch
	Italiano

The Initial Setup menu closes and the setup is complete.

The DVD player is now ready to use.

Here you need to make a few settings to get the DVD player up and running. You can change these settings later (see page 44).

Note:

•You can cancel the Initial Setup by pressing the Open/ Close [ ] button, and complete the settings later by using the onscreen setup menus (see page 44).

1

Remote

controller

Use the Up and Down []/[ ] buttons to select a TV shape, and then press [Enter].

Select “4:3 Letter box” or “4:3 Pan Scan” if you have a 4:3 TV. Select “16:9 Widescreen” or “16:9 Com- pressed” if you have a widescreen TV. See page 46 for more information.

Initial Setup

TV Shape

HDMI Output Setting	✔ 4:3 Letter box
	4:3 Pan Scan
On-Screen Language	16:9 Widescreen
	16:9 Compressed

The “HDMI Output Setting” menu appears next.

27