Samsung SRD-470, 470D user manual Remote Devices, POS Devices, Item, and press Enter button

Page 46

using the DVR

•Duration : Sets the alarm duration for the alarm signal and beep sound.

-If <BEEP> was selected, a beep will sound.

-If <All> was selected, both beep sound and alarm signal through rear side ports will output.

M<Check> status means that the HDD is operating but it has problems that require technical examination.

( ) appears on the Live screen.

<Replace> status means that the HDD has defect and requires immediate replacement.

( ) appears on the Live screen.

6.When the HDD Alarm setup is done, press <OK>.

Remote Devices

You can set the RS-485 communication for use of PTZ Camera and system keyboard with the DVR.

Using the mouse may help make setup easier.

3.

Use the up/down buttons (

) in <Device> window to

4.

move to <Remote Device>, and press [ENTER] button.

Use direction buttons (

) to move to the desired

 

item, and press [ENTER] button.

5.Set the values of each communication setup of the remote device.

•Baudrate : Baud rate settings of the DVR, PTZ camera and system keyboard should be matched for proper operations.

6.Make sure to match IDs of the DVR, System Keyboard and Remote Control, and press <OK>.

Remote Device

 

 

 

Baudrate

Parity

Data

Stop Bit

Transfer type

9600

None

8

1

Half Duplex

System Keyboard

OFF

ID

00

 

Remote Control

ON

ID

00

 

 

OK

 

Cancel

 

MFor changing the remote control’s ID, refer to “Changing the Remote Control ID”. (Page 12)

POS Devices

You can set properties of POS devices connected to the DVR.

A POS device connection requires channel, preset, and Port/Ethernet settings.

Using the mouse may help make setup easier.

3.

Use the up/down buttons (

) in <Device> window to

4.

move to <POS Device>, and press [ENTER] button.

Use direction buttons (

) to move to a desired

 

item, and set the value.

 

•POS USE : When selected <POS USE>, DVR and POS will be connected.

JIf you change settings for the device and press <OK> while the <POS USE> is not checked, the changes for POS device will not be saved.

POS Device

POS USE

POS Device Setup

POS

CH

Preset

Port/Ethernet

1

None

No preset

None

2

None

No preset

None

3

None

No preset

None

4

None

No preset

None

OK Cancel

46_ using the DVR

Z6806127401A_SRD-470, 470D-IB_EN46 46

2010-04-30 오후 6:08:36

Page 45 Page 47
Image 46
Page 45 Page 47
Contents
Channel DVR SRD-470/470DChannel DVR Important Safety Instructions Normal capacity 170mAh Before StartContinuous standard load 0.2mA Contents WEB Viewer Backup ViewerSearch & Play AppendixFeatures Package Contents Standards ApprovalsPart Names and Functions Rear SRD-470 Part Names and Functions FrontSRD-470D Audio ModeREC Using the Numeric buttons Remote ControlChanging the Remote Control ID  Installation Checking the Installation EnvironmentManufacturer Installation HDD AdditionHard disk bracket Master hard disk SATA2 SATA1 Connecting POS Device Connecting the VIDEO, AUDIO, and MonitorConnecting the USB  Connecting with Other DeviceConnecting the alarm input signal Connecting the Alarm INPUT/OUTPUTConnecting the RS485 Device Connecting the alarm output signalConnecting to Internet through Ethernet 10/100/1000BaseT Connecting the NetworkConnecting to the Internet using the router Connecting to Internet through Adsl Shutting Down the System Getting StartedStarting the system Live screen appears with a beepLocking All Buttons LoginClick Login Login dialog appears figureIcons on the Live Screen Live Screen ConfigurationLive Split Mode Menu Error InformationSplit Mode Menu Live Screen MenuSingle Mode Menu ZoomSystem Date/Time/Language Time. PTZ Alarm FreezeView the Launcher Menu PTZSwitching the screen automatically Live ModeSwitching the screen mode PIPChannel Setting Switching to Single ModeZoom Selecting a Spot Out modeSpot OUT Multichannel Live MenuFreeze Audio ON/OFF in Single modeAudio ON/OFF Event MonitoringSeconds Setting the Date/Time/Language System SetupDate/Time/Language Using the Calendar Setting Holiday Using the DVR You can set and change Administrator’s ID and password Setting the AdministratorUsing Virtual Keyboard Permission ManagementSetting the Group To set the group authorityTo restrict the user permissions To change the user passwordLogin UserWhen the user setup is done, press OK Setting the UserSetting Permissions Use direction buttonsChecking the System Information System ManagementSystem Management BroadcastS/W Upgrade  UsingSystem Upgrade Updating the SoftwareLog Information SettingsSystem Log Event Log Backup LogBackup Log Select Event Log Use direction buttons Camera Setting the Device Setting the Camera Press Enter buttonWhen the camera setup is done, press OK Setting the PTZUsingthe DVR Storage Device Confirming DevicesYou can format a storage device HDD AlarmFormatting Select FormatItem, and press Enter button Remote DevicesPOS Devices Remote DevicePOS Device Setup Add PresetMonitor Setting the MonitorSetting Display position Move to Monitor, and press Enter buttonSelect Mode Use direction buttons Setting the Spot OutSetting the Screen Mode When the screen mode setup is done, press OKRecord Setting the RecordingRecording Schedule Recording ScheduleEvent Record Duration REC Quality / ResolutionSetting Standard Recording Properties Recording Color TagsRecord Option Setting Event Recording PropertiesResolution CifsSensor Detection Setting the EventWindow of sensor detection setup appears Detection, and press Enter buttonSetting the Motion Detection Area Motion DetectionAlarm Schedule Video Loss DetectionYou can backup the desired data to a connected device BackupSetting the Backup Backup window appearsSetting the Connection Network ConfigurationConnection Mode You can set the network connection route and protocolSetting the Protocol When no router is used Connecting and Setting the NetworkDynamic IP Dhcp mode When a router is used Internal Port Range Set the same to the External Port RangeLive Transfer Ddns SettingNetwork setting window, press the up/down Use the direction buttonsSmtp Setting Mailing ServiceEvent Setting Recipient Setting Group SettingGroupAdd recipient PTZ Device Using the PTZ cameraControlling a PTZ Device Getting started with PTZCamera Setting Preset SettingExit System Info Time Search It does not appear in Backup SearchSearch You can search for recorded data of a desired timeEvent Search Backup SearchSearch & Play Select POS Search in the Search menu POS SearchMotion Search Select Motion Search in the Search menuPlay PlaybackPlay Introducing WEB Viewer What is Web Viewer?Product Features System RequirementsConnecting WEB Viewer  WEB ViewerZ6806127401ASRD-470, 470D-IBEN72 2010-04-30 오후 Using Live Viewer Full Screen Mode You can change the split mode by clicking each number iconSingle Mode OSD Information DisplayChanging the Live Screen Mode Setting the display of the OSD time informationConnected DVR Saving the Live Screen on the PC Capture Saves the current screen into a BMP or Jpeg fi leUsing PTZ Camera Changing the Live Screen ChannelZ6806127401ASRD-470, 470D-IBEN78 2010-04-30 오후 Using Search Viewer Z6806127401ASRD-470, 470D-IBEN80 2010-04-30 오후 Z6806127401ASRD-470, 470D-IBEN81 2010-04-30 오후 Searching the Recorded Video in the Calendar Searching the Recorded Video in the TimelineSystem Viewer SetupYou can confi gure the various settings of the DVR system Controlling PlaybackHoliday Permission ManagementSystem Management Camera DeviceStorage Device POS Device Remote DeviceMonitor Record For more information, refer to Setting the Recording.Recording Schedule Event Record Duration REC Quality & ResolutionEvent Record OptionMotion Detection Alarm ScheduleYou can set the alarm output time if a video loss occurs Video Loss DetectionDdns NetworkConnection Live TransferMailing Service SmtpAbout SEC Backup Viewer Recommended System Requirements Backup Viewer Product Specification Ntsc PALHDD 2CIFM4CIFL  AppendixPOS Product Overview SRD-470/470DDefault Setting ManagementCategory Details Factory Default DurationSmtp Troubleshooting Quick start guide backup, search HDD installed. Try again with a different HDDBy the service personnel Forgot the password Contact the DVR administrator for help4CIF 2CIFCIF Z6806127401ASRD-470, 470D-IBEN106 2010-04-30 오후 Correct disposal of batteries in this product Sales Network TEL +44-1932-45-5300 FAX +44-1932-45-5325
Top Page Image Contents