Samsung SRD-470, 470D user manual Setting the Protocol

using the DVR

•IP, Gateway, Subnet Mask, and DNS

-For <Static IP> : You can directly input IP address, Gateway, Subnet Mask and DNS.

-For <Dynamic IP> : IP address, Gateway, and Subnet Mask are set automatically.

-For <ADSL> : IP address, Gateway, and Subnet Mask are set automatically.

•User ID, Password : In case you selected ADSL, provide the “User ID” and its “Password”.

Connection Mode
Connection	Protocol
x Connection Mode	ADSL
x Bandwidth	600kbps
x IP	192.168. 1.200
x Gateway	192.168. 1.	1
x Subnet Mask	255.255.255. 0
x DNS	Manual	168.126. 63.	1
x User ID	ID
x Password	********
	OK	Cancel

M DNS server for <Dynamic IP> and <ADSL> can be set by user only if you selected <Manual>.

6.When the connection setup is done, press <OK>.

Setting the Protocol

3.	Use the up/down buttons (	) in <Network> window to	Connection Mode
	move to <Connection Mode>, and press [ENTER]
			Connection	Protocol
	button.
	Select <Protocol>.		x Protocol Type		TCP
4.			x Port(TCP)			~
					554		557
			x Port(UDP)
					8000 ~ 8159
			x Unicast/Multicast
5.	Use direction buttons (	) to move to a desired			Unicast
			x Multicast IP
					224.126. 63.	1
			x TTL
	item, and set the value.				5
			x Webviewer Port
					80

•Protocol Type : Select the protocol type between TCP and

UDP. OK Cancel

If selected UDP, selections of Port (TCP), Port (UDP), and Unicast/ Multicast are activated.

•Port (TCP) : Initially, <554~557> is set. It increases / decreases by 4.

- TCP: It has better stability and lower speed when compared to UDP, and recommended for internet environments.

•Port (UDP) : Initially, <8000~8159> is set. It increases / decreases by 160.

- UDP : It has less stability and faster speed when compared to TCP, and recommended for local area network (LAN) environments.

•Unicast/Multicast : Select one between Unicast and Multicast. If selected Multicast, Multicast IP and TTL are activated.

- Unicast : Transfers data (UDP, TCP) individually to each connecting client.

- Multicast : Multiple client can receive the data (only in UDP) without putting additional traffic load to the network.

•Multicast IP : User can directly input.

•TTL : Select from 0 ~ 255. Initial value for the TTL is set to <5>.

•Webviewer Port : Enter the port number for the Web Viewer. Initially, it is set to <80>.

6.When the protocol setup is done, press <OK>.

58_ using the DVR

Z6806127401A_SRD-470, 470D-IB_EN58 58

2010-04-30 오후 6:09:12