Samsung 470D, SRD-470 user manual Video Loss Detection, Alarm Schedule

Video Loss Detection

You can set the alarm to be generated on a camera disconnection, which causes a video loss.

Using the mouse may help make setup easier.

3.	Use the up/down buttons (	) in <Event> window to	Video Loss Detection
	move to <Video Loss Detection>, and press [ENTER]
			CH	Video Loss State	Alarm	Alarm Duration
	button.
			1	OFF	None	10 sec
	A window of video loss detection area setup appears.		2	OFF	None	10 sec
			3	OFF	None	10 sec
4.	Use direction buttons (	) to move to a desired	4	OFF	None	10 sec
	item, and set the value.

•Video Loss State : Sets whether to activate video loss detection.

• Alarm : Sets the alarm output method. OK Cancel

For further information on alarm output, refer to “HDD Alarm > Alarm”. (Page 45)

•Alarm Duration : Sets the duration of alarm signal and alarm sound.

5.When the video loss detection setup is done, press <OK>.

Alarm Schedule

You can set the conditions and operating hours for scheduled alarms.

Using the mouse may help make setup easier.

3. Use the up/down buttons (	) in <Event> window to
		Alarm Schedule
move to <Alarm Schedule>, and press [ENTER] button.
		Alarm1
4. A window of <Alarm Schedule> settings appears.
		All	0	1	2	3	4	5	6	7	8	9	10	11	12	13	14	15	16	17	18	19	20	21	22	23
		Sun
5. Alarm : Sets the alarm output method.		Mon
		Tue
 For further information on alarm output, refer to “HDD Alarm >		Wed
		Thu
		Fri
Alarm”. (Page 45)		Sat
		Hol
• <ON> : Marked in orange, and always generates alarm on		OFF			ON				Event Sync											Apply to All Alarm
scheduled time.
• <OFF> : Marked in white, no alarm is generated even if an											OK			Cancel
event occurs.
• Event Sync : Marked in Blue, generates alarm only when an event occurs.
• Apply to All Alarm : Applies the confi gured schedule to all
		Alarm Schedule
alarms.
		Alarm1
M  When the alarm is generated on the scheduled time, you can		All	0	1	2	3	4	5	6	7	8	9	10	11	12	13	14	15	16	17	18	19	20	21	22	23
		Sun
		Mon		Apply to All Alarm
stop the alarm by canceling the schedule.		Tue
		Wed							Apply the alarm scheduling to all?
6. When the Alarm Schedule setup is done, press <OK>.		Thu
		Fri									OK				Cancel
		Sat
		Hol
		OFF			ON				Event Sync											Apply to All Alarm
											OK			Cancel

English _55

 USING THE DVR

Z6806127401A_SRD-470, 470D-IB_EN55 55

2010-04-30 오후 6:09:05