Samsung SRD-470, 470D user manual Setting the Monitor, Setting Display position

using the DVR

Monitor

You can confi gure information to be displayed and its format for Spot Out monitor.

Setting the Monitor

Using the mouse may help make setup easier.

3.	Use the up/down buttons (	) in <Device> window to
	move to <Monitor>, and press [ENTER] button.
4.	Select <Monitor>.
5.	Use direction buttons (	) to move to a desired
	item, and set the value.

•Event Display : Sets the dwell time of the event channel display on the monitor when an event occurs.

If selected <Continuous>, it displays the channel until you press [ALARM] button to release it.

•Display : Displays only checked items on the monitor screen.

Monitor
Monitor	Spot Out	Mode
x Event Display	OFF
x Display	Date	Time	CH Name	Icon
x VGA	800x600
x Sharpness	Level1 (Low)
Display Position Setup
	OK	Cancel

•VGA : The current monitor may not display the video if the <VGA> settings do not match with this player

•Sharpness : You can adjust the sharpness of the video output signal.

6.When the monitor setup is done, press <OK>.

Setting Display position

Some monitors many not display information (camera name, icon, time information, etc.) about the DVR, depending on the condition. Then, you can change the display position of the data.

3. In the <Device> window, press the up/down ( ) button to move to <Monitor> and press the [ENTER] button.

4.Select the <Monitor> item.

5.Select <Display Position Setup> in the bottom.

You will move to the <Display Position Setup> window.

6.Use the four direction buttons or the number buttons on the front panel or the remote control to adjust the data position.

Display Position Setup
	30
30	30
	30
OK	Cancel

48_ using the DVR

Z6806127401A_SRD-470, 470D-IB_EN48 48

2010-04-30 오후 6:08:41