Samsung CL21M5W, CL29V10MN, CL21K5MQ, CL21A11MQ manual Install AT I O N

Page 18

I N S T A L L AT I O N

3

Connect a coaxial cable between the ANTENNA OUT terminal on the VCR and the antenna terminal on the TV.

A coaxial cable is usually included with a VCR. (If not, check your local electronics store).

4

Connect a set of audio cables between the AUDIO OUT jacks on the VCR and the AUDIO jacks on the TV.

5

Connect a video cable between the VIDEO OUT jack on the VCR and the VIDEO jack on the TV.

Follow the instructions in “Viewing a VCR or Camcorder Tape” to view your VCR tape.

Note: This figure shows the Standard connector-jack panel. The actual configuration for your TV may be different.

2.5 CHAPTER TWO: INSTALLATION

Image 18

Contents Owner’s Instructions Risk of Electric Shock Do not Open Thank You for Choosing Samsung Example Antenna Grounding Installation Your New TVOperation Special Features TroubleshootingList of Features Chapter OneFamiliarizing Yourself with The TV ¨ Remote Control Sensor´ VOL , + Stand by indicator Front Panel ButtonsSide / Front Panel Jacks Audio signals from VCRs, DVD playersVideo signals from VCRs, DVD players and similar devices HeadphoneDVD Video Input Option Rear Panel JacksVideo Input Option Audio Inputs+100 Remote Control´ Number buttons SizePress to rewind a tape in your VCR Remote Control ¯ VCR Controls˘ PIP Controls Not available Press to fast forward the tape in your VCRTunes to the previous channel ’ MTS Multichannel Television Stereo VOL -, VOL + Displays the main on-screen menuConnecting VHF and UHF Antennas Antennas with 300-ohm Flat Twin LeadsSeparate VHF and UHF Antennas Connecting Cable TVAntennas with 75-ohm Round Leads Cable without a Cable BoxConnecting to a Cable Box that Descrambles All Channels Connecting to a Cable Box that Descrambles Some ChannelsConnect this cable to a two-way splitter Connecting a VCR Unplug the cable or antenna from the back of the TVInstall AT I O N Make sure the jacks you are using are underneath the number Connecting an S-VHS VCR OptionConnecting a DVD Player Option Connecting a Second VCR to Record from the TVConnecting a Camcorder Installing Batteries in the Remote Control Turning the TV On and Off Plug & Play FeaturePress the Power button on the remote control Message Plug & Play is displayedIf you want to reset this feature Viewing the Menus and On-Screen Displays Viewing the MenusViewing the Display Selecting a Menu Language Press CH two times to Selecting the Video Signal-sourceMemorizing the Channels ANT antennaStoring Channels in Memory Automatic Method Press the CH button to select Auto programAdding and Erasing Channels Manual Method Press the VOL+ or VOL- button to select Added or ErasedAdjusting the Volume Changing ChannelsLabeling the Channels Press the VOL + buttonBe highlighted Each label has four fields See top paragraph Setting the Clock Or CH button repeat Edly until the correct hour appearsCustomizing the Picture Press Menu to display menuUsing Automatic Picture Settings Press Menu to display the menuCustomizing the Sound Using Automatic Sound Settings Press the Menu button to display the menuSetting The On/Off Melody Viewing a VCR or Camcorder Tape Press the VOL+ or VOL- buttonCustomizing Your Remote Control Setting Up Your Remote Control to Operate Your VCR or DVDTurn off your VCR or VCR Codes DVD CodesSetting Up Your Remote Control to Operate Your Cable Box Cable Box CodesFine Tuning Channels Press the VOL+ and VOL- buttons to adjust the fine tuningChanging the Screen Size Digital Noise Reduction Tilt Only CL29K5MQ Press the CH button to select TiltUsing the Surf Feature Setting the On/Off Timer Setting the Sleep Timer When finished, press the VOL + buttonSound Features Choosing a Multi-Channel Sound MTS SoundtrackExtra sound settings Turbo Sound, Surround, or Auto Volume Turbo SoundViewing Closed Captions Viewing the Demonstration Identifying Problems Chapter FiveCleaning and Maintaining Your TV Using Your TV in Another CountrySpecifications