Samsung CL21M5W, CL29V10MN manual Viewing a VCR or Camcorder Tape, Press the VOL+ or VOL- button

Page 38

O P E R AT I O N

Viewing a VCR or Camcorder Tape

You must select the appropriate mode in order to view the VCR or Camcorder signal on the TV.

1

Press the MENU button to display the menu.

Press the CH ▼ button
twice to select	Labeling	: ----
“Channel”, then press the
VOL+ button.
VOL+ button.

2

Press the CH ▼ button twice to select the “TV/AV”.

Labeling	: ----

3

Press the VOL+ or VOL- button .

You will switch between viewing the signals com- ing from equipment con- nected to the TV’s A/V jacks, and the TV signal.

4

Press the MENU button twice to exit.

3.16 CHAPTER THREE: TV OPERATION

Image 38

Contents Owner’s Instructions Risk of Electric Shock Do not Open Thank You for Choosing Samsung Example Antenna Grounding Operation InstallationYour New TV Special Features TroubleshootingList of Features Chapter OneFamiliarizing Yourself with The TV ¨ Remote Control Sensor´ VOL , + Stand by indicator Front Panel ButtonsSide / Front Panel Jacks Audio signals from VCRs, DVD playersVideo signals from VCRs, DVD players and similar devices HeadphoneDVD Video Input Option Rear Panel JacksVideo Input Option Audio Inputs+100 Remote Control´ Number buttons SizePress to rewind a tape in your VCR Remote Control ¯ VCR Controls˘ PIP Controls Not available Press to fast forward the tape in your VCRTunes to the previous channel ’ MTS Multichannel Television Stereo VOL -, VOL + Displays the main on-screen menuConnecting VHF and UHF Antennas Antennas with 300-ohm Flat Twin LeadsSeparate VHF and UHF Antennas Connecting Cable TVAntennas with 75-ohm Round Leads Cable without a Cable BoxConnect this cable to a two-way splitter Connecting to a Cable Box that Descrambles All ChannelsConnecting to a Cable Box that Descrambles Some Channels Connecting a VCR Unplug the cable or antenna from the back of the TVInstall AT I O N Make sure the jacks you are using are underneath the number Connecting an S-VHS VCR OptionConnecting a DVD Player Option Connecting a Second VCR to Record from the TVConnecting a Camcorder Installing Batteries in the Remote Control Turning the TV On and Off Plug & Play FeaturePress the Power button on the remote control Message Plug & Play is displayedIf you want to reset this feature Viewing the Display Viewing the Menus and On-Screen DisplaysViewing the Menus Selecting a Menu Language Press CH two times to Selecting the Video Signal-sourceMemorizing the Channels ANT antennaStoring Channels in Memory Automatic Method Press the CH button to select Auto programAdding and Erasing Channels Manual Method Press the VOL+ or VOL- button to select Added or ErasedAdjusting the Volume Changing ChannelsBe highlighted Each label has four fields See top paragraph Labeling the ChannelsPress the VOL + button Setting the Clock Or CH button repeat Edly until the correct hour appearsCustomizing the Picture Press Menu to display menuUsing Automatic Picture Settings Press Menu to display the menuCustomizing the Sound Using Automatic Sound Settings Press the Menu button to display the menuSetting The On/Off Melody Viewing a VCR or Camcorder Tape Press the VOL+ or VOL- buttonTurn off your VCR or Customizing Your Remote ControlSetting Up Your Remote Control to Operate Your VCR or DVD VCR Codes DVD CodesSetting Up Your Remote Control to Operate Your Cable Box Cable Box CodesFine Tuning Channels Press the VOL+ and VOL- buttons to adjust the fine tuningChanging the Screen Size Digital Noise Reduction Tilt Only CL29K5MQ Press the CH button to select TiltUsing the Surf Feature Setting the On/Off Timer Setting the Sleep Timer When finished, press the VOL + buttonSound Features Choosing a Multi-Channel Sound MTS SoundtrackExtra sound settings Turbo Sound, Surround, or Auto Volume Turbo SoundViewing Closed Captions Viewing the Demonstration Identifying Problems Chapter FiveSpecifications Cleaning and Maintaining Your TVUsing Your TV in Another Country