Samsung CL29V10MN, CL21K5MQ manual Setting the Sleep Timer, When finished, press the VOL + button

Page 48

S P E C I A L F E AT U R E S

5

Press the VOL + button to select “On/Off.”

Press the CH ▲ (or CH ▼) button to turn the on- timer “On.” (Repeatedly pressing the CH ▲ or CH ▼ button will alter- nate between on and off.)

6

When finished, press the VOL + button .

7

To set the Off time, press the CH ▼ button to select “Off time.”

Press the VOL + button and set the hours and minutes. (Follow the same procedure as in steps 1~6 above.)

To deactivate the “On time,” select “Off” during this step.

If no function buttons (including remote control buttons or front panel buttons) are operated for three hours after the TV is turned on by “On time”, the TV will automatically turn off.

8

When finished setting the timer, press the MENU button three times to exit.

Setting the Sleep Timer

The sleep timer automatically shuts off the TV after a preset time (from 10 to 180 minutes).

1

Press the SLEEP button on the remote control.

2

Press the SLEEP button repeatedly until the appropriate time interval appears (any of the preset values from “Off” to “180”).

After about 5 seconds, the sleep display will disappear from the screen, and the time interval will be set.

4.10 CHAPTER FOUR: SPECIAL FEATURES

Image 48
Contents Owner’s Instructions Risk of Electric Shock Do not Open Thank You for Choosing Samsung Example Antenna Grounding Installation Your New TVOperation Special Features TroubleshootingList of Features Chapter One¨ Remote Control Sensor ´ VOL , + Stand by indicatorFamiliarizing Yourself with The TV Front Panel ButtonsAudio signals from VCRs, DVD players Video signals from VCRs, DVD players and similar devicesSide / Front Panel Jacks HeadphoneRear Panel Jacks Video Input OptionDVD Video Input Option Audio InputsRemote Control ´ Number buttons+100 SizeRemote Control ¯ VCR Controls ˘ PIP Controls Not availablePress to rewind a tape in your VCR Press to fast forward the tape in your VCR’ MTS Multichannel Television Stereo  VOL -, VOL +Tunes to the previous channel Displays the main on-screen menuConnecting VHF and UHF Antennas Antennas with 300-ohm Flat Twin LeadsConnecting Cable TV Antennas with 75-ohm Round LeadsSeparate VHF and UHF Antennas Cable without a Cable BoxConnecting to a Cable Box that Descrambles All Channels Connecting to a Cable Box that Descrambles Some ChannelsConnect this cable to a two-way splitter Connecting a VCR Unplug the cable or antenna from the back of the TVInstall AT I O N Make sure the jacks you are using are underneath the number Connecting an S-VHS VCR OptionConnecting a DVD Player Option Connecting a Second VCR to Record from the TVConnecting a Camcorder Installing Batteries in the Remote Control Plug & Play Feature Press the Power button on the remote controlTurning the TV On and Off Message Plug & Play is displayedIf you want to reset this feature Viewing the Menus and On-Screen Displays Viewing the MenusViewing the Display Selecting a Menu Language Selecting the Video Signal-source Memorizing the ChannelsPress CH two times to ANT antennaStoring Channels in Memory Automatic Method Press the CH button to select Auto programAdding and Erasing Channels Manual Method Press the VOL+ or VOL- button to select Added or ErasedAdjusting the Volume Changing ChannelsLabeling the Channels Press the VOL + buttonBe highlighted Each label has four fields See top paragraph Setting the Clock Or CH button repeat Edly until the correct hour appearsCustomizing the Picture Press Menu to display menuUsing Automatic Picture Settings Press Menu to display the menuCustomizing the Sound Using Automatic Sound Settings Press the Menu button to display the menuSetting The On/Off Melody Viewing a VCR or Camcorder Tape Press the VOL+ or VOL- buttonCustomizing Your Remote Control Setting Up Your Remote Control to Operate Your VCR or DVDTurn off your VCR or VCR Codes DVD CodesSetting Up Your Remote Control to Operate Your Cable Box Cable Box CodesFine Tuning Channels Press the VOL+ and VOL- buttons to adjust the fine tuningChanging the Screen Size Digital Noise Reduction Tilt Only CL29K5MQ Press the CH button to select TiltUsing the Surf Feature Setting the On/Off Timer Setting the Sleep Timer When finished, press the VOL + buttonSound Features Choosing a Multi-Channel Sound MTS SoundtrackExtra sound settings Turbo Sound, Surround, or Auto Volume Turbo SoundViewing Closed Captions Viewing the Demonstration Identifying Problems Chapter FiveCleaning and Maintaining Your TV Using Your TV in Another CountrySpecifications