Samsung CL29V10MN Connecting a DVD Player Option, Connecting a Second VCR to Record from the TV

Page 20

I N S T A L L AT I O N

Connecting a Second VCR to Record from the TV

Your TV can send out signals of its picture and sound to be recorded by a second VCR. To do this, connect your second VCR as follows:

1

Connect a set of audio cables between the AUDIO OUT jacks on the TV and the AUDIO IN jacks on the VCR.

(The VCR input jacks might be either on the front or on back of the VCR.)

2

Connect a video cable between the VIDEO OUT jack on the TV and the VIDEO IN jack on the VCR.

Refer to your VCR’s instructions for more information about how to record using this kind of connection.

Connecting a DVD Player (Option)

The rear panel jacks on your TV make it easy to connect a DVD player to your TV.

1

Connect a set of audio cables between the AUDIO INPUT 2 jacks on the TV and the AUDIO OUT jacks on the DVD player.

2

Connect a video cable between the DVD-IN (Y, Pb, Pr) jacks on the TV and the DVD-OUT (Y, Pb, Pr) jacks on the DVD player.

Note: For an explanation of Component video, see your DVD player's owner's manual.

2.7 CHAPTER TWO: INSTALLATION

Image 20

Contents Owner’s Instructions Risk of Electric Shock Do not Open Thank You for Choosing Samsung Example Antenna Grounding Operation InstallationYour New TV Special Features TroubleshootingList of Features Chapter One¨ Remote Control Sensor ´ VOL , + Stand by indicatorFamiliarizing Yourself with The TV Front Panel ButtonsAudio signals from VCRs, DVD players Video signals from VCRs, DVD players and similar devicesSide / Front Panel Jacks HeadphoneRear Panel Jacks Video Input OptionDVD Video Input Option Audio InputsRemote Control ´ Number buttons+100 SizeRemote Control ¯ VCR Controls ˘ PIP Controls Not availablePress to rewind a tape in your VCR Press to fast forward the tape in your VCR’ MTS Multichannel Television Stereo  VOL -, VOL +Tunes to the previous channel Displays the main on-screen menuConnecting VHF and UHF Antennas Antennas with 300-ohm Flat Twin LeadsConnecting Cable TV Antennas with 75-ohm Round LeadsSeparate VHF and UHF Antennas Cable without a Cable BoxConnect this cable to a two-way splitter Connecting to a Cable Box that Descrambles All ChannelsConnecting to a Cable Box that Descrambles Some Channels Connecting a VCR Unplug the cable or antenna from the back of the TVInstall AT I O N Make sure the jacks you are using are underneath the number Connecting an S-VHS VCR OptionConnecting a DVD Player Option Connecting a Second VCR to Record from the TVConnecting a Camcorder Installing Batteries in the Remote Control Plug & Play Feature Press the Power button on the remote controlTurning the TV On and Off Message Plug & Play is displayedIf you want to reset this feature Viewing the Display Viewing the Menus and On-Screen DisplaysViewing the Menus Selecting a Menu Language Selecting the Video Signal-source Memorizing the ChannelsPress CH two times to ANT antennaStoring Channels in Memory Automatic Method Press the CH button to select Auto programAdding and Erasing Channels Manual Method Press the VOL+ or VOL- button to select Added or ErasedAdjusting the Volume Changing ChannelsBe highlighted Each label has four fields See top paragraph Labeling the ChannelsPress the VOL + button Setting the Clock Or CH button repeat Edly until the correct hour appearsCustomizing the Picture Press Menu to display menuUsing Automatic Picture Settings Press Menu to display the menuCustomizing the Sound Using Automatic Sound Settings Press the Menu button to display the menuSetting The On/Off Melody Viewing a VCR or Camcorder Tape Press the VOL+ or VOL- buttonTurn off your VCR or Customizing Your Remote ControlSetting Up Your Remote Control to Operate Your VCR or DVD VCR Codes DVD CodesSetting Up Your Remote Control to Operate Your Cable Box Cable Box CodesFine Tuning Channels Press the VOL+ and VOL- buttons to adjust the fine tuningChanging the Screen Size Digital Noise Reduction Tilt Only CL29K5MQ Press the CH button to select TiltUsing the Surf Feature Setting the On/Off Timer Setting the Sleep Timer When finished, press the VOL + buttonSound Features Choosing a Multi-Channel Sound MTS SoundtrackExtra sound settings Turbo Sound, Surround, or Auto Volume Turbo SoundViewing Closed Captions Viewing the Demonstration Identifying Problems Chapter FiveSpecifications Cleaning and Maintaining Your TVUsing Your TV in Another Country