Samsung manual S Ta L L At I O N

Page 18

I N S TA L L AT I O N

3

Connect a coaxial cable between the ANTENNA OUT terminal on the VCR and the antenna terminal on the TV.

A coaxial cable is usually included with a VCR. (If not, check your local electronics store).

4

Connect a set of audio cables between the AUDIO OUT jacks on the VCR and the AUDIO jacks on the TV.

5

Connect a video cable between the VIDEO OUT jack on the VCR and the VIDEO jack on the TV.

Follow the instructions in “Viewing a VCR or Camcorder Tape” to view your VCR tape.

Note: This figure shows the Standard connector-jack panel. The actual configuration for your TV may be different.

2.5 CHAPTER TWO: INSTALLATION

Image 18

Contents Owner’s Riskofelectricshock Donotopen Thank You for Choosing Samsung Safety Installation Your New TVOperation Special Features TroubleshootingList of Features Chapter OneFamiliarizing Yourself with The TV Front/Side Panel Jacks Video Input OptionRear Panel Jacks DVD Video Input OptionAudio Inputs +100 Remote Control´ Number buttons SizeRemote Control ¯ VCR Controls ∙ F.F˘ PIP Controls Not available ¨ Mute ’ MTS Multichannel Television StereoConnecting VHF and UHF Antennas Antennas with 300-ohm Flat Twin Leads Separate VHF and UHF Antennas Connecting Cable TV Antennas with 75-ohm Round Leads Cable without a Cable BoxConnecting to a Cable Box that Descrambles All Channels Connecting to a Cable Box that Descrambles Some ChannelsConnecting a VCR Unplug the cable or antenna from the back of the TVS TA L L AT I O N Make sure the jacks you are using are underneath the number Connecting an S-VHS VCR OptionConnecting a DVD Player Option Connecting a Second VCR to Record from the TVConnecting a Camcorder Installing Batteries in the Remote Control Plug & Play Feature Turning the TV On and OffIf you want to reset this feature Viewing the Menus and On-Screen Displays Viewing the MenusViewing the Display Selecting a Menu Language Selecting the Video Signal-source Memorizing the ChannelsStoring Channels in Memory Automatic Method Press the CH button to select Auto programAdding and Erasing Channels Manual Method Adjusting the Volume Changing ChannelsLabeling the Channels Setting the Clock Or CH button repeat- edly until the correct hour appearsCustomizing the Picture Press Menu to display menuUsing Automatic Picture Settings Customizing the Sound Using Automatic Sound Settings Press the Menu button to display the menuSetting The On/Off Melody Viewing a VCR or Camcorder Tape Customizing Your Remote Control Setting Up Your Remote Control to Operate Your VCR or DVDVCR Codes DVD Codes Setting Up Your Remote Control to Operate Your Cable Box Cable Box CodesFine Tuning Channels Changing the Screen Size Digital Noise Reduction Tilt CL29M6W/CL29M9W/CL29K3W/CL29M5W Using the Surf Feature Setting the On/Off Timer Setting the Sleep Timer Sound Features Choosing a Multi-Channel Sound MTS SoundtrackExtra sound settings Turbo Sound, Surround, or Auto Volume Turbo SoundViewing Closed Captions Viewing the Demonstration Identifying Problems Chapter FiveCleaning and Maintaining Your TV Using Your TV in Another CountrySpecifications