Samsung manual Make sure the jacks you are using are underneath the number

Page 19

I N S TA L L AT I O N

Connecting an S-VHS VCR (Option)

Your Samsung TV can be connected to an S-Video signal from an S-VHS VCR. (This connection delivers a better picture as compared to a standard VHS VCR.)

1

To begin, follow steps 1–3 in the previous section to connect the antenna or cable to your VCR and your TV.

2

Connect a set of audio cables between the AUDIO OUT jacks on the VCR and the 2 AUDIO INPUT jacks on the TV.

Make sure the jacks you are using are underneath the number “2”.

3

Connect an S-video cable between the S-VIDEO OUT jack on the VCR and the S-VIDEO INPUT jack on the TV.

An S-video cable is usually included with an S-VHS VCR. (If not, check your local electronics store.)

CHAPTER TWO: INSTALLATION 2.6

Image 19

Contents Owner’s Riskofelectricshock Donotopen Thank You for Choosing Samsung Safety Your New TV InstallationOperation Troubleshooting Special FeaturesChapter One List of FeaturesFamiliarizing Yourself with The TV Video Input Option Front/Side Panel JacksDVD Video Input Option Rear Panel JacksAudio Inputs Size Remote Control´ Number buttons +100∙ F.F Remote Control ¯ VCR Controls˘ PIP Controls Not available ’ MTS Multichannel Television Stereo ¨ MuteAntennas with 300-ohm Flat Twin Leads Connecting VHF and UHF AntennasCable without a Cable Box Connecting Cable TVAntennas with 75-ohm Round Leads Separate VHF and UHF AntennasConnecting to a Cable Box that Descrambles Some Channels Connecting to a Cable Box that Descrambles All ChannelsUnplug the cable or antenna from the back of the TV Connecting a VCRS TA L L AT I O N Connecting an S-VHS VCR Option Make sure the jacks you are using are underneath the numberConnecting a Second VCR to Record from the TV Connecting a DVD Player OptionConnecting a Camcorder Installing Batteries in the Remote Control Turning the TV On and Off Plug & Play FeatureIf you want to reset this feature Viewing the Menus Viewing the Menus and On-Screen DisplaysViewing the Display Selecting a Menu Language Memorizing the Channels Selecting the Video Signal-sourcePress the CH button to select Auto program Storing Channels in Memory Automatic MethodAdding and Erasing Channels Manual Method Changing Channels Adjusting the VolumeLabeling the Channels Or CH button repeat- edly until the correct hour appears Setting the ClockPress Menu to display menu Customizing the PictureUsing Automatic Picture Settings Customizing the Sound Press the Menu button to display the menu Using Automatic Sound SettingsSetting The On/Off Melody Viewing a VCR or Camcorder Tape Setting Up Your Remote Control to Operate Your VCR or DVD Customizing Your Remote ControlVCR Codes DVD Codes Cable Box Codes Setting Up Your Remote Control to Operate Your Cable BoxFine Tuning Channels Changing the Screen Size Digital Noise Reduction Tilt CL29M6W/CL29M9W/CL29K3W/CL29M5W Using the Surf Feature Setting the On/Off Timer Setting the Sleep Timer Choosing a Multi-Channel Sound MTS Soundtrack Sound FeaturesTurbo Sound Extra sound settings Turbo Sound, Surround, or Auto VolumeViewing Closed Captions Viewing the Demonstration Chapter Five Identifying ProblemsUsing Your TV in Another Country Cleaning and Maintaining Your TVSpecifications