Samsung manual Connecting a Camcorder

Page 21

I N S TA L L AT I O N

Connecting a Camcorder

The side panel jacks on your TV make it easy to connect a camcorder to your TV. They allow you to view the camcorder tapes without using a VCR. (Also see “Viewing a VCR or Camcorder Tape” on page 3.16)

1

Locate the A/V output jacks on the camcorder. They are usually found on the side or back of the camcorder.

2

Connect an audio cable between the AUDIO OUT- PUT jack on the cam- corder and the AUDIO terminals on the side of the TV.

3

Connect a video cable between the VIDEO OUT- PUT jack on the cam- corder and the VIDEO ter- minal on the side of the TV.

The audio-video cables shown here are usually included with a Camcorder. (If not, check your local electronics store.) If your camcorder is stereo, you need to connect a set of two cables.

Note: This figure shows the Standard connector-jack panel. The actual configuration for your TV may be different.

CHAPTER TWO: INSTALLATION 2.8

Image 21

Contents Owner’s Riskofelectricshock Donotopen Thank You for Choosing Samsung Safety Installation Your New TVOperation Troubleshooting Special FeaturesChapter One List of FeaturesFamiliarizing Yourself with The TV Video Input Option Front/Side Panel JacksRear Panel Jacks DVD Video Input OptionAudio Inputs ´ Number buttons Remote Control+100 SizeRemote Control ¯ VCR Controls ∙ F.F˘ PIP Controls Not available ’ MTS Multichannel Television Stereo ¨ MuteAntennas with 300-ohm Flat Twin Leads Connecting VHF and UHF AntennasAntennas with 75-ohm Round Leads Connecting Cable TVSeparate VHF and UHF Antennas Cable without a Cable BoxConnecting to a Cable Box that Descrambles Some Channels Connecting to a Cable Box that Descrambles All ChannelsUnplug the cable or antenna from the back of the TV Connecting a VCRS TA L L AT I O N Connecting an S-VHS VCR Option Make sure the jacks you are using are underneath the numberConnecting a Second VCR to Record from the TV Connecting a DVD Player OptionConnecting a Camcorder Installing Batteries in the Remote Control Turning the TV On and Off Plug & Play FeatureIf you want to reset this feature Viewing the Menus and On-Screen Displays Viewing the MenusViewing the Display Selecting a Menu Language Memorizing the Channels Selecting the Video Signal-sourcePress the CH button to select Auto program Storing Channels in Memory Automatic MethodAdding and Erasing Channels Manual Method Changing Channels Adjusting the VolumeLabeling the Channels Or CH button repeat- edly until the correct hour appears Setting the ClockPress Menu to display menu Customizing the PictureUsing Automatic Picture Settings Customizing the Sound Press the Menu button to display the menu Using Automatic Sound SettingsSetting The On/Off Melody Viewing a VCR or Camcorder Tape Setting Up Your Remote Control to Operate Your VCR or DVD Customizing Your Remote ControlVCR Codes DVD Codes Cable Box Codes Setting Up Your Remote Control to Operate Your Cable BoxFine Tuning Channels Changing the Screen Size Digital Noise Reduction Tilt CL29M6W/CL29M9W/CL29K3W/CL29M5W Using the Surf Feature Setting the On/Off Timer Setting the Sleep Timer Choosing a Multi-Channel Sound MTS Soundtrack Sound FeaturesTurbo Sound Extra sound settings Turbo Sound, Surround, or Auto VolumeViewing Closed Captions Viewing the Demonstration Chapter Five Identifying ProblemsCleaning and Maintaining Your TV Using Your TV in Another CountrySpecifications