Samsung manual Connecting a DVD Player Option, Connecting a Second VCR to Record from the TV

Page 20

I N S TA L L AT I O N

Connecting a Second VCR to Record from the TV

Your TV can send out signals of its picture and sound to be recorded by a second VCR. To do this, connect your second VCR as follows:

1

Connect a set of audio cables between the AUDIO OUT jacks on the TV and the AUDIO IN jacks on the VCR.

(The VCR input jacks might be either on the front or on back of the VCR.)

2

Connect a video cable between the VIDEO OUT jack on the TV and the VIDEO IN jack on the VCR.

Refer to your VCR’s instructions for more information about how to record using this kind of connection.

Connecting a DVD Player (Option)

The rear panel jacks on your TV make it easy to connect a DVD player to your TV.

1

Connect a set of audio cables between the AUDIO INPUT 2 jacks on the TV and the AUDIO OUT jacks on the DVD player.

2

Connect a video cable between the DVD-IN (Y, Pb, Pr) jacks on the TV and the DVD-OUT (Y, Pb, Pr) jacks on the DVD player.

Note: For an explanation of Component video, see your DVD player's owner's manual.

2.7 CHAPTER TWO: INSTALLATION

Image 20

Contents Owner’s Riskofelectricshock Donotopen Thank You for Choosing Samsung Safety Operation InstallationYour New TV Special Features TroubleshootingList of Features Chapter OneFamiliarizing Yourself with The TV Front/Side Panel Jacks Video Input OptionAudio Inputs Rear Panel JacksDVD Video Input Option Remote Control ´ Number buttons+100 Size˘ PIP Controls Not available Remote Control ¯ VCR Controls∙ F.F ¨ Mute ’ MTS Multichannel Television StereoConnecting VHF and UHF Antennas Antennas with 300-ohm Flat Twin LeadsConnecting Cable TV Antennas with 75-ohm Round LeadsSeparate VHF and UHF Antennas Cable without a Cable BoxConnecting to a Cable Box that Descrambles All Channels Connecting to a Cable Box that Descrambles Some ChannelsConnecting a VCR Unplug the cable or antenna from the back of the TVS TA L L AT I O N Make sure the jacks you are using are underneath the number Connecting an S-VHS VCR OptionConnecting a DVD Player Option Connecting a Second VCR to Record from the TVConnecting a Camcorder Installing Batteries in the Remote Control Plug & Play Feature Turning the TV On and OffIf you want to reset this feature Viewing the Display Viewing the Menus and On-Screen DisplaysViewing the Menus Selecting a Menu Language Selecting the Video Signal-source Memorizing the ChannelsStoring Channels in Memory Automatic Method Press the CH button to select Auto programAdding and Erasing Channels Manual Method Adjusting the Volume Changing ChannelsLabeling the Channels Setting the Clock Or CH button repeat- edly until the correct hour appearsCustomizing the Picture Press Menu to display menuUsing Automatic Picture Settings Customizing the Sound Using Automatic Sound Settings Press the Menu button to display the menuSetting The On/Off Melody Viewing a VCR or Camcorder Tape Customizing Your Remote Control Setting Up Your Remote Control to Operate Your VCR or DVDVCR Codes DVD Codes Setting Up Your Remote Control to Operate Your Cable Box Cable Box CodesFine Tuning Channels Changing the Screen Size Digital Noise Reduction Tilt CL29M6W/CL29M9W/CL29K3W/CL29M5W Using the Surf Feature Setting the On/Off Timer Setting the Sleep Timer Sound Features Choosing a Multi-Channel Sound MTS SoundtrackExtra sound settings Turbo Sound, Surround, or Auto Volume Turbo SoundViewing Closed Captions Viewing the Demonstration Identifying Problems Chapter FiveSpecifications Cleaning and Maintaining Your TVUsing Your TV in Another Country