Samsung SP54T9, SP43T9 manual Becoming Familiar with the Remote Control

Becoming Familiar with the Remote Control

The remote control is used mainly to:

◆Change channels and adjust the volume

◆Set up the television using the on-screen menu system

The following table presents the most frequently used buttons and their functions.

Button	Viewing Function	Menu Function
	Used to display the next	-
	stored channel.
	Used to display the	-
	previous stored channel.

to Used to display the corresponding channels.

➢For double digit channels, the second digit must be pushed immediately after the first. Failure to do this will result in a single digit channel being displayed.

-/--/---		Used to select a channel numbered ten or over.
		Press this button, and the “--” or “---” symbol is displayed.
		Enter the two or three-digit channel number.
PRE-CH		Press the PRE-CHbutton. The TV will switch to the last
(	)	channel viewed.
		To quickly switch between two channels that are far apart,
		tune to one channel, then use the numeric buttons to select
		second channel. Then, use the PRE-CHbutton to quickly
		alternate between them.
		Used to increase the	-
		volume.
		Used to decrease the	-
		volume.

MUTE Used to switch the sound off temporarily.

( ) ➢ To turn the sound back on, press this button again, or

press the or button.

MENU		Used to display the	Used to return to the previous
(	)	on-screen menu system.	menu or normal viewing.
		-	Used to:
			◆ Display a submenu
			containing selections for
			the current menu option.
			◆ Increase/decrease a
			menu option value.
		-	Used to confirm your choice.
	TV	Used to switch the	Used to exit from the menu
(	)	television on when it is	system and return to normal
		in Standby mode.	viewing directly.
EXIT		-	Used to exit from the any
(	)		display.

English - 15