Samsung SP54T9, SP43T9 manual Inserting the Batteries in the Remote Control

Page 11

Inserting the Batteries in the Remote Control

You must insert or replace the batteries in the remote control when you:

◆Purchase the television

◆ Find that the remote control is no longer operating correctly

1Remove the cover on the rear of the remote control by pressing the symbol () downwards and then pulling firmly to remove it.

2Insert two R03, UM4, “AAA” 1.5V or equivalent batteries taking care to respect the polarities:

◆ - on the battery against - on the remote control ◆ + on the battery against + on the remote control

3 Replace the cover by aligning it with the base of the remote control and pressing it back into place.

Connecting to an Aerial or Cable Television Network

To view television channels correctly, a signal must be received by the set from one of the following sources:

◆An outdoor aerial

◆A cable television network

◆A satellite network

1In the first three cases, connect the aerial or network input cable to the 75Ω coaxial socket on the rear of the television.

2If you are using an indoor aerial, you may need to turn it when tuning your television until you obtain a picture that is both sharp and clear.

For further details, refer to:

◆“Storing Channels Automatically” on page 22.

◆“Storing Channels Manually” on page 24.

Rear of the TV

or

Cable Television

Network

English - 11

Image 11

Contents Color Television Page English Contents Symbols Control Panel depending on the model SP43Q1 SP43T9 SP54T9 SP43R1 SP54R1 Rear of the TV Connection PanelUsing a Display Deck depending on the model Infrared Remote Control Connecting to an Aerial or Cable Television Network Inserting the Batteries in the Remote ControlConnecting a Satellite Receiver or Decoder Mains lead is attached to the rear of your television Switching Your Television On and OffPlacing Your Television in Standby Mode To Used to display the corresponding channels Becoming Familiar with the Remote ControlPlug & Play Feature If you want to reset this feature Choosing Your Language Displaying InformationAdjusting the Screen Automatically Self Focus Deactivating the Automatic Execution of the Self Focus Removing the Self Focus from the Display Storing Channels Automatically Sorting the Stored Channels Auto PAL Secam NT4.43 NT3.58 Storing Channels ManuallyChannel mode Skipping Unwanted Channels Locking the Channel Fine Tuning Channel Reception Using the LNA Low Noise Amplifier Feature Viewing the Channel Scan Picture Dynamic Standard Movie Custom Changing the Picture StandardCustomizing the Picture Settings Press the Menu button Result The main menu is displayed Selecting the Picture Size 43 ModelLifespan of the CRT to be reduced Selecting the Picture Size Wide Model169 Panorama Auto Selecting the Scan ModeFreezing the Current Picture Using the Digital NR Digital Noise Reduction FeatureDNIeTM Digital Natural Image engine Setting the Blue Screen Mode TV Ext.- AV1- AV2 AV3 S-Video Viewing the Picture In Picture PIPEasy functions of remote control Changing the Sound Standard Adjusting the Sound Settings Adjusting the Volume Automatically Setting the TruSurround XT Setting the Melody Sound Type of broadcast On-screen indication Selecting the Sound Mode depending on the modelSetting and Displaying the Current Time Setting the Sleep Timer Absent Power Off Switching the Television On and Off AutomaticallyViewing an External Signal Source Part Contents Teletext FeatureDisplaying the Teletext Information To display Press Selecting Display OptionsSelecting a Teletext Storing Teletext Pages depending on the model Rear of the TV Connecting to the External DevicesConnecting to the Audio Output Connecting to the S-Video Input Connecting to the Component InputProgramming the Remote Control for Other Components VCR Remote Control Codes Programming the Remote Control for Other ComponentsCable Box Catv Remote Control Codes Troubleshooting Before Contacting Service Personnel Contact Samsung WORLD-WIDE