
Selecting the Picture Size (Wide Model)
TV | Picture |
|
Mode | : Dynamic | √ |
Custom |
| √ |
Color Tone | : Normal | √ |
Size |
| √ |
Scan Mode | : Auto | √ |
Digital NR | : Off | √ |
▼More
Move | Enter | Return |
TVSize
16:9
Panorama Zoom 1 Zoom 2 4:3 Cinema 1 Cinema 2
Move | Enter | Return |
TV |
You can select the picture size which best corresponds to your viewing requirements.
1Press the MENU ( ) button.
Result: The main menu is displayed.
2Press the ▲ or ▼ button until the Picture is selected.
Result : The options available in the Picture group are displayed.
3Press the ENTER ( ) button.
4Press the ▲ or ▼ button until the Size is selected. Press the ENTER ( ) button.
Result : The Size menu is displayed.
5Select the required mode by pressing the ▲ or ▼ button. Press the ENTER ( ) button.
Result : The following modes are available:
16:9 | Adjusts the picture to fit into the 16:9 wide aspect |
| ratio. |
|
|
Panorama | Adjusts a Wide picture to appear natural. |
|
|
Zoom 1 | Vertically enlarges the picture approximately 130%. |
|
|
Zoom 2 | Vertically enlarges the picture about approximately |
| 150%. |
|
|
4:3 | Adjusts the picture to fit into a 4:3 normal aspect |
| ratio. (Prolonged use in 4:3 mode may cause the |
| lifespan of the CRT to be reduced.) |
|
|
Cinema 1 To maintain optimum screen display, the picture is vertically enlarged and the letterboxed (black margin) area is filled with gray instead.
Cinema 2 When the top and bottom of the screen margin are black (blank), they will change to gray.
➢◆ Lifting is available in the Zoom 1 or Zoom 2 mode by pressing the ▲ or ▼ button.
◆Subtitles may be
➢◆ You can select these options by simply pressing the P.SIZE button on the remote control.
◆The picture size can not be changed in the PIP mode.