Samsung CT-20D8BL, CT-21S7W, CT-21D9W manual Connecting to a Cable Box that Descrambles All Channels

Page 13

I N S T A L L AT I O N

Connecting to a Cable Box that Descrambles All Channels

1

Find the cable that is con- nected to the ANTENNA OUT terminal on your cable box.

2

Connect the other end of this cable to the VHF/UHF antenna terminal on the back of the TV.

▼ This terminal might be labeled “ANT OUT,” “VHF OUT,” or simply, “OUT.”

Connecting to a Cable Box that Descrambles Some Channels

If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths of coaxial cable. (These items are available at most electronics stores.)

1

Find and disconnect the cable that is connected to the ANTENNA IN terminal on your cable box.

▼	This terminal might be labeled

“ANT IN,” “VHF IN,” or simply, “IN.”

2

Connect this cable to a two-way splitter.

3

Connect a coaxial cable between an OUTPUT ter- minal on the splitter and the IN terminal on the cable box.

CHAPTER TWO: INSTALLATION 2.3

Image 13

Contents CT-1488BL/CT-1488L/CT-14S7BL AA68-02343A-00 ENGRisk of Electric Shock Do not Open Thank You for Choosing Samsung Example Antenna Grounding Your New TV InstallationOperation Troubleshooting Special FeaturesChapter One List of FeaturesFamiliarizing Yourself with The TV Video and Audio input jacks Rear Panel Jacks´ VHF/UHF Antenna terminal ´ Number buttons Remote Control +100 MTS OptionAntennas with 300-ohm Flat Twin Leads Connecting VHF and UHF AntennasAntennas with 75-ohm Round Leads Connecting Cable TVSeparate VHF and UHF Antennas Cable without a Cable BoxConnecting to a Cable Box that Descrambles Some Channels Connecting to a Cable Box that Descrambles All ChannelsConnect this cable to a two-way splitter Install AT I O N Unplug the cable or antenna from the back of the TV Connecting a VCRConnecting a Camcorder Installing Batteries in the Remote Control Turning the TV On and Off Press the Power button on the remote controlViewing the Menus and On-Screen Displays Viewing the MenusSelecting a Menu Language Memorizing the Channels Selecting the Video Signal-sourceANT antenna STD, HRC or IRC all cable TV Storing Channels in Memory Automatic Method Press the VOL+ or VOL- button to select Added or Erased Adding and Erasing Channels Manual MethodChanging Channels Adjusting the VolumeOr CH button repeat Edly until the correct hour appears Setting the ClockPress the Menu button to display the menu Customizing the PictureUsing Automatic Picture Settings Using Automatic Sound Settings Press the VOL+ or VOL- button Viewing a VCR or Camcorder TapePress the Menu button twice to exit Chapter Four Fine Tuning ChannelsChanging the Screen Size Using the Surf Feature Setting the On/Off Timer When finished, press VOL + button Setting the Sleep TimerPress the Sleep button on the remote control Choosing a Multi-Channel Sound MTS Soundtrack Option Sound FeaturesSurround Extra sound settings Turbo Sound, or SurroundViewing Closed Captions Chapter Five Identifying ProblemsUsing Your TV in Another Country Cleaning and Maintaining Your TVSpecifications