S P E C I A L F E AT U R E S
Sound Features
Choosing a Multi-Channel Sound (MTS) Soundtrack (OPTION)
Depending on the particular program being broadcast, you can listen to Stereo, Mono or a Separate Audio Program. (SAP audio is usually a
1
Press the MENU button to display the menu.
Press the CH▼ button to select the “Sound” menu, then press the VOL+ but- ton.
2
Press the CH▼ button four times to select “MTS”.
3
Press the VOL + or VOL - button to select “Mono,” “SAP,” or “Stereo.”
Press the MENU button twice to exit
▼ | The text at the bottom of the |
menu tells you if the incoming audio is stereo, SAP, or mono.
•Choose Stereo for channels that are broadcasting in stereo.
•Choose Mono for channels that are broadcasting in mono, or if you are having difficulty receiving a stereo signal.
•Choose SAP to listen to the Separate Audio Program, which is usually a
You can also change the MTS setting by pressing the “MTS” button on the remote control. (When you change channels, MTS is set to “Stereo” automatically.
To listen in ‘SAP’ or ‘Mono,’ change the MTS setting.)
4.6 CHAPTER FOUR: SPECIAL FEATURES