Samsung DVD-R145 instruction manual Initial Setup, OSD Language Setup, Auto Clock Set

Initial Setup

If you connected an external Audio System, turn on your Audio System and select AUX, CD or DVD.

The OSD (On-Screen Display) displayed on the screen may vary depending on conditions such as the disc type and whether the disc has been inserted or not.

1. OSD Language Setup

After plugging in the recorder, the first time you press the POWER button, the screen shown below appears.

Setup	1Press the POWER button.
ystemS
		Press 1 for English
		Touche 2 pour Français
		Pulse 3 para Español
		MACROVISION ST01

2Press a number button to select the language.

	■ If the language for the startup screen is not set,
	the settings may change whenever you turn the
	power on or off. Therefore, make sure that you
NOTE
	select the language you want to use.

2. Clock Set

This menu is used to set the current time. You need to set the time first to use timer recording.

You must have the antenna/cable connected to set the Auto Clock. See pages 15, 17 for Antenna connections(Method 1 and 3).

Method 1 or 3

If you have the antenna connected via Method 1 or 3 on pages 15,17, the DVD Recorder automatically sets the clock by searching for a channel that carries a time signal and sets your time zone and daylight saving(if applicable).

Method 2

If you have the antenna connected via Method 2 on page 16, you have to set the clock manually.

See “Manual Clock set” on pages 33.

Auto Clock Set

1	With the unit in Stop mode/No Disc mode, press the
	MENU button.
		DVD-Recorder		Timer Record
		No Disc
		Timer Rec.	Timer Record	√
		Setup	Scheduled Record List	√

		MOVE ENTER RETURN EXIT
2	Select Setup using the …† buttons, then press the
	ENTER or √ button.

DVD-Recorder			Setup
No Disc
Timer Rec.	System		√
Setup	Clock Set		√
	Channel Set		√
	Language		√
	Audio		√
	Video		√
	Parental Control		√
MOVE	ENTER	RETURN	EXIT

3 Select Clock Set using the …† buttons, then press the ENTER or √ button.

Clock Set menu will be displayed.

DVD-Recorder			Clock Set
No Disc
Timer Rec.	Auto Clock Set		√
Setup	Manual Clock Set		√
MOVE	ENTER	RETURN	EXIT

4 Select Auto Clock Set using the …† buttons, then press the ENTER or √ button.

■The Menus are slightly different depending on whether a disc is inserted or not. The menus

NOTE	described on the next few pages are with no
	disc in the unit.

■The menus are not available during playback or recording.

32 - English