Samsung DVD-R145 instruction manual CH Digit Lock, Mode for SET button, Control, Set Top Box Test

CH Digit Lock

Select the sub item(Off or Lock to two digits) using the …† buttons, then press the ENTER button.

•Off : Select this when your cable box or satellite receiver only accepts a three or more digit channel number. Normally select this.

•Lock to two digits : Select this when your cable box or satellite receiver only accepts a two digit channel number.

DVD-Recorder		Set Top Box Control
No Disc
Timer Rec.	Brand Code	: 0000	√
	Connection	: CH3
Setup			√
	CH Digit Lock	Off
	Mode for SET button	Lock to two digits
	Control	: Off	√
	Set Top Box Test		√
MOVE	ENTER	RETURN	EXIT

Mode for SET button

Select the sub item(Off, Mode 1 or Mode 2) using the …† buttons, then press the ENTER button.

Select "Mode 1" or "Mode 2" if your cable box or satellite receiver requires pressing the SET button, after entering the channel number.

•Off : No code is sent when the SET button is pressed. Normally select this.

•Mode 1 or Mode 2 : Sends the channel number you entered.

Control

Select the sub item(Off or On) using the …† buttons, then press the ENTER button.

•Off : Turns off the cable box or satellite receiver control function.

Select this if you do not want to use the supplied set top box controller.

•On : Turns on the cable box or satellite receiver control function.

DVD-Recorder		Set Top Box Control
No Disc
Timer Rec.	Brand Code	: 0000	√
	Connection	: CH3
Setup			√
	CH Digit Lock	: Off	√
	Mode for SET button	: Off	√
	Control	Off
	Set Top Box Test	On
MOVE	ENTER	RETURN	EXIT

Set Top Box Test					System
Select Set Top Box Test using the …† buttons, then
press the ENTER or œ √ button. System menu will be
					Setup
displayed.
	DVD-Recorder		Set Top Box Control
	No Disc
	Timer Rec.
	Setup	Is your Set Top Box now tuned to channel 28?
		Yes		No

NOTE

DVD-Recorder		Set Top Box Control
No Disc
Timer Rec.	Brand Code	: 0000	√
	Connection	: CH3
Setup			√
	CH Digit Lock	: Off	√
	Mode for SET button	Off
	Control	Mode 1
	Set Top Box Test	Mode 2
MOVE	ENTER	RETURN	EXIT

■ If "Mode 1" does not work, try "Mode 2."

■ If your cable box or satellite receiver does not respond to either setting, contact the manufacturer of the cable box or satellite receiver.

MOVE ENTER RETURN EXIT

	■	If you cannot get the recorder to control your
		cable box/satellite receiver.
NOTE
		Check the connection and position of the IR
		Blaster cable.(page16)
		If your cable box or satellite receiver still does
		not operate with this recorder, contact your
		cable company to see if they can provide you
		with a compatible cable box or satellite receiver.

English - 39