Samsung DVD-R145 instruction manual Press the Return or œ button to return, Output selection

3D Noise Reduction (motion adaptive noise reduction)

DVD-Recorder Video

No Disc
Timer Rec.	TV Aspect	: 16:9 Wide	√
Setup	Input Level	: Darker	√
	Black Level	: 7.5 IRE	√
	3D Noise Reduction	Off
	HDMI/DVI Resolution	On
	DivX(R) Registration		√

MOVE ENTER RETURN EXIT

•On : Provides a cleaner picture through noise reduction (for recording).

•Off : Normal

HDMI/DVI Resolution

This setting is used when the unit is connected by HDMI or DVI with Display devices (TV, projector, etc).

DivX(R) Registration

Please use the Registration code to register your DVD Recorder with the DivX(R) Video On Demand format. To learn more, visit www.divx.com/vod

DVD-Recorder					Video
No Disc
Timer Rec.			TV Aspect	: 16:9 Wide		√
			DivX(R) Video On Demand			√
			Your registration code is :			√
			JGWAPBNV			√
		To learn more, visit www.divx.com/vod
						√
			Done
						√
	MOVE		ENTER	RETURN	EXIT

5 Use the …† buttons to select the desired item, Then press the ENTER or √ button.

■ Press the RETURN or œ button to return

S

DVD-Recorder	Video
No Disc
TV Aspect	: 16:9 Wide

NOTE

to the previous menu.

Press the MENU button to exit the menu.

ystem

Timer Rec.			√
Setup	Input Level	: Darker	√
	Black Level	: 7.5 IRE	√
	3D Noise Reduction	: Off	√
	HDMI/DVI Resolution	480P
	DivX(R) Registration	720P
		1080i
MOVE	ENTER	RETURN	EXIT

•480p : 720 x 480

•720p : 1280 x 720

•1080i : 1920 x 1080

Output selection

Connect the DVD-R145 to your TV via HDMI or DVI. Set your TV's input to HDMI or DVI.

•Press the P.SCAN button while the unit is in stop mode to select the output resolution.

-If your TV is connected the HDMI or DVI cable, the output resolution mode changes in the following sequence each time you press the P.SCAN button:

➞ 480p ➞ 720p ➞ 1080i

-If your TV is connected the AV or component cables(without HDMI/DVI cable), the output resolution mode toggles 480p/480i in turn.

■ Even if HDMI/DVI cable is connected to

■IRE: Short for the Institute of Radio Engineers. An IRE unit is a relative unit of measure equaling 1/140th of the peak-to- peak (p-p) video amplitude.

Setup

NOTE

your TV, the AV connection outputs only 480i and the component connection outputs only 480p irrespective of the on-screen display.

English - 45