Samsung DVD-R145 About the Info button, Disc Information, Before you start, Different

Content Protection for Recordable Media (CPRM)

CPRM is a mechanism that ties a recording to the media on which it is recorded. It is supported by some DVD recorders, but not by many DVD players. Each blank recordable DVD

has a unique 64-bit media ID etched in the BCA(Burst Cutting Area). When protected content is recorded onto the disc, it can be encrypted with a 56-bit C2 (Cryptomeria) cipher derived from the media ID.

During playback, the ID is read from the BCA and used to generate a key to decrypt the contents of the disc.

If the contents of the disc are copied to other media, the ID will be absent or wrong and the data will not be decryptable.

About the INFO button

	The INFO function allows you to view the current status
	and progress of playback and recording. Depending on
	the disc type and status, the displayed screen may be
ecordingR	different.
		Checking the available disc space
		(Disc Information)
	When recording on a used disc, make sure that there is
	enough disc space for recording. With DVD-RAMs or
	DVD ±RWs, you can free up disc space by erasing titles.
	• Press the		INFO button.
		The disc information display window appears.
		Items in the display differ depending on the disc type
		or the recording format.
	!			DVD-RW(VR)	Disc Info		@
	#			Disc Name	Disc
	$			Total Title	1
	%			Total Playlist	None
	^			Recordable Time	01: 12 XP
				Protection	Not Protected
				Screen	CH 11 [Mono]
	&			JAN 01 2006 SUN	12:00 AM	*

! Disc Type

@Current information display status

# Disc Name

$ Total Title : Total number of titles

% Total Playlist : Total number of Playlists

^ Recordable Time : The longest continuous recording time in each of the record modes(approximate)

& Date : Current date

* Time : Current time

Recording the current TV program you are watching

Before you start

1.Check to make sure the antenna cable is connected.

2.Check that the disc has enough available space for the recording. Adjust the recording mode.

1	Press the	OPEN/CLOSE	button and place a
	recordable disc on the disc tray.
2	Press the	OPEN/CLOSE button to close the disc tray.
	Wait until “LOAD” disappears from the front panel display.
	DVD-RW
	If an unused DVD-RW disc is inserted, you will be
	prompted to initialize first. Make your selection using
	the œ √ buttons, then press		ENTER.(See page 49)

Uninitialized Disc

Do you want to initialize this disc?

Yes No

50 - English