Samsung DVD-R145 Discs that cannot be played, Some types of discs, or when specific

Page 60

Discs that cannot be played

DVD-Video with a region number other than “1” or “ALL”

5” 2.6 GB and 5.2 GB DVD-RAM

3.9 GB DVD-R Disc for Authoring.

A DVD±R/DVD-RW(V) disc which has been recorded and not finalized in a different manufacturer's recorder.

PAL discs

DVD-ROM/PD/MV-Disc, etc.

Video CD/CVD/SVCD/CD-ROM/CDV/CD-G/CD-I

 

This DVD recorder can only operate with discs that

 

 

are compatible with DVD-RAM Standard Version 2.0.

NOTE

Playback and/or recording may not work for

 

 

 

some types of discs, or when specific

 

 

operations, such as angle change and aspect

 

 

ratio adjustment, are being performed.

 

 

Information about the discs is written in detail

 

 

on the box. Please refer to this if necessary.

 

Do not allow the disc to become dirty or scratched.

 

 

Fingerprints, dirt,dust,scratches or deposits of

 

 

cigarette smoke on the recording surface may

 

 

make it impossible to use the disc for recording.

 

DVD-RAM/±RW/±R discs may not be able to

 

 

play on some DVD players, depending on the

 

 

player, disc and the condition of the recording.

 

Discs with PAL programs recorded on them

 

 

can not be recorded on using this product.

 

 

 

Playing a Disc

Playback

1

Press the OPEN/CLOSE button.

The tray opens.

2 Place a disc gently into the tray with the disc’s label facing up.

For DVD-RAM discs, insert the printed side facing up.

3 Press the OPEN/CLOSE button to close the disc tray.

Your DVD Recorder closes the disc tray and loads the disc automatically.

When the recorder is powered on and a disc is in the tray, the unit will be activated and wait in Stop mode.

Press PLAY( ) button to start playback.

If you want the unit to play automatically when it is powered off with a disc in the unit, power on with the PLAY( ) button.

4 Press the STOP( ) button to stop playback.

When you stop playing the disc, the recorder remembers where you stopped. When you press PLAY button again,

 

NOTE

it will pick up where you left off. (unless the disc is

 

 

 

 

 

 

removed or the recorder is unplugged, or if you do not

 

 

 

press the STOP button twice.) This function is only

 

 

 

applicable to DVD-VIDEO, DVD-RAM, DVD±RW, DVD±R

 

 

 

or audio CDs (CD-DA).

 

 

 

 

 

 

 

 

 

Do not move your DVD recorder while

playing, as this may cause damage to the

Caution disc.

Make sure to press the OPEN/CLOSE button to open or close the disc tray.

Do not push the disc tray while it is being opened or closed, as this may cause a product malfunction.

Do not place foreign materials on or in the disc tray.

Some functions may perform differently or be disabled depending on the disc type.

If this occurs, refer to the instructions written on the disc case.

Be especially careful that children's fingers are not caught between the disc tray and the tray chassis when it closes.

You must only insert one DVD disc at a time. Inserting two or more discs will not allow playback and may cause damage to the DVD player.

60 - English

Image 60
Contents DVD-R145 Getting Started FCC Note for U.S.APrecaution Important Safety InstructionsMaintenance of Cabinet Handling CautionsDisc Specifications Disc StorageDVD-Video Audio CDDVD-RW Disc Playback and Recording DVD+RW Disc Playback and RecordingDVD-RAM Disc Playback and Recording Do not use the following discsContents Before Recording Checking the available disc spaceRecording the current TV program you are Watching Before PlayingCopying data from a digital camcorder using Create a DVD video title using a DVD±RW/DVD±RHigh quality digital audio and video recording Using a DVD-RAM Using a DVD±RW/+RUsing a DVD-R Before ReadingWhen using a DVD-RW disc in VR Mode When using a DVD-RW disc in Video ModeWhen using a DVD±R disc Description Front panelFront Panel Display Check for the supplied accessories below UnpackingRear Panel Antenna connection does not passTour of the Remote Control Step Connecting HDMI/ DVI to a TV Quick OverviewStep Connecting the Antenna Cable Antenna + DVD Recorder + TV No Cable boxVHF/UHF ANT RF OUT jack of this DVD playbackPages 103~105 Cable providerGetting Connected Place the Cable Box Control WandEnglish Connecting the Video Cable Connecting to a Video input jackConnecting to an S-Video input jack Video input modeVideo or Component video outputs are Jacks on TVor AV amplifierConnect Component video cablesnot supplied R jacks onR jacks On your TV or AV amplifier RedP RConnecting the Audio Cable Connecting to your TVSelect one of the Audio connections on the following pages This connection will use your TV’s speakersConnecting to a stereo amplifier with analog input jacks Connecting to an AV amplifier with a digital input jack DTS and DTS Digital Out are trademarks of DTS, IncConnecting HDMI/DVI to a TV Connecting to a TV with Hdmi JackConnecting to a TV with DVI Jack To change Hdmi output resolution, seeHdmi connection description Why does Samsung use HDMI? What is the HDCP?Connecting External Devices Connecting a Camcorder to the AV 2 INjacks Connecting a Camcorder to the DV in jack Connecting Power Cord Preparing Remote ControlSetting the Remote Control Install Batteries in the Remote ControlUsed to switch the television on and off 06, 4949, 52 60, 72, 73Enter or √ button Initial Setup OSD Language SetupClock Set Auto Clock SetTo setup, follow steps 1 to 3 Manual Clock SetClock Data CH Time ZoneChannel Set using Channel SetAuto Channel Memory …† buttonsSetting Up the Audio Options Manual Channel SetSelect Dynamic Compression-On using the …† buttons Digital OutputDynamic Compression Setting Up the TV Aspect If you have a 43 standard TVSystem Setting Menu button on the remote controlSet Top Box Control Menu items differ depending on the disc typeMode for SET button CH Digit LockControl Set Top Box TestCM Skip Time Setting …† buttons, thenEP Mode Time Setting Select the desired time using the …† buttons, thenSelect System using the …† buttons, then press Automatic Chapter CreationQuick Recording Setting This function only works for normal recordingWith a disc inserted and the unit in Stop mode, press Language Setting Language setup menu will be displayedQuick Recording is set to Off as Press the Return or œ button to return to the previous menuThis allows you to set up the TV screen settings Input Level Adjusts the level of the input signalVideo option menu will be displayed TV Aspect seePress the Return or œ button to return To the previous menu Press the Menu button to exit the menuOutput selection First time the Parental Control is accessed, ‘Create the Password’ message will be displayedRemote control Password. Enter your password againSetting the Rating Level Changing the PasswordSee page 102 if you forgot your password Before Recording Recordable discsRecording Mode Concerning Copy Control SignalsRecording Formats Unrecordable videoAbout the Info button Disc InformationBefore you start DifferentOnto a DVD+RW/+R disc Be formatted before starting to recordMost new discs are sold unformatted Do not use DVD-R authoring discs with This unitEquipment Input source during recordingChannel Number AV1 AV2 DV Input source while recording Onto a DVD+RW/+R disc DVD-RAM/DVD±RW/ DVD+R discs mustDVD Recorder stops recording After finishing recording, the DVD030 100 130 200 300 400off To stop recordingMode Record mode Or 8 hours because the unit usesVBRVariable Bit Rate Encoding system Consumes more disc memoryIf the timer settings overlap To return to the previous menuList, and then press the Enter or √ button Press the …† buttons to select Delete, and then pressYou will be prompted with the delete confirmation Message, For example Do you want to deletePower on TV using the TV remote control Press the Time Slip button on the remote controlWhen you copy from a camcorder on Enter button Selected entry will be deleted from the listRegion code DVD-Video only Disc types that can be playedSome types of discs, or when specific Ratio adjustment, are being performedDiscs that cannot be played Using the Disc Menu & Title Menu Using the Search FunctionsFor DVD-VIDEO discs For DVD-RAM/DVD±RW/±R discsSearching Chapters or Tracks Slow Motion PlayStep Motion Play About AnykeyUsing the Repeat Function Using the Repeat buttonPlaying RepeatedlyRepeat Playback Using the Anykey button Using the Anykey buttonDVD-RW Video mode do not repeat a chapter Using the Audio button VR modeSelecting the Subtitle Selecting the Audio languageChanging the Camera Angle Zooming-InThey are disc-specific Language for the disc menu onlyUsing Bookmarks When the disc tray is opened and thenClearing a Bookmark PlayingSelectingBack atheBookmarkAudio languageUsing Markers Playing Back a MarkerClearing a Marker Play Mode icon Playing an AudioPlaying an Audio CD CD-DA/MP3 Playing an Audio CDCD-DAPlaying an MP3 Disc MP3 Screen ElementsInsert an MP3 disc into the disc tray Navigation, and then press the Enter or √ buttonPlay Option Mode Cancel buttonPlay mode window appears Selected track is played repeatedlySelect Play option using …† buttons Playing a Picture CDTo Program Tracks You can register a maximum of 30 tracks in the playlistNormal 2X 4X 2X Normal Press the …† buttons to select the DivX, and thenUsing the Title List button Using the Menu buttonMPEG4 Function Description Rename, Delete, Edit, Protection See pages 78~84Pressing the Anykey button during PlaybackYou can also play a recorded program by Free Space Function Recording a titleThis function is only available with DVD+RW discs Appear on the left side of the title listTitle List PlaylistRenaming Labeling a Title Or use the Menu buttonRename from the Title List, and then press Locking Protecting a Title Deleting a TitleOr use the Menu button Protect from the Title List, and then pressDeleting a Section of a Title Be at least 5 seconds long Edit Title List screen will disappearEditing a Chapter Select a chapter you want to hide using Follow steps 1 to 3Playback related buttons Playback related buttonsDividing a Title Advanced Editing Playlist Creating a PlaylistTo make a new playlist To return to Edit Playlist menuPlaying Entries in the Playlist Follow these instructions to play the playlist entriesPlaylist entries will be played Press the …† buttons to select Edit Playlist,Enter the desired characters using the …† œ √ buttons Renaming a Playlist EntryUsing the Menu button Editing a Scene for the PlaylistPlaying a Selected Scene To setup, follow steps 1 to 3 ScenePress the Enter button at the start point of the scene Image and ending point time are displayed on the End windowAdding a Scene Enter buttonSelected scene is moved to the selected position Using the Play List button Deleting a SceneCopying a Playlist Entry to the Playlist Scene, Copy, DeleteUsing the Playlist button Deleting a Playlist Entry from the PlaylistPlaylist can contain up to 99 playlist After the deletion operation has finishedOn the remote control Disc ManagerEditing the Disc Name Beginning editing.seeDisc Protection Formatting a DiscButton on the remote control Deleting All Title ListsMenu items may differ depending on the disc Disc protection should be cleared firstEdit Compatible Menu buttonFor DVD+RW discs, this function needs to be Finalizing a Disc Entries from the record listProcess Unfinalizing a Disc V/VR mode Video modeDVD-RW can be finalized or unfinalized in VR mode Finalize UnfinalizeTroubleshooting PowerRecording Recording is possible forPlayback Timer Recording Timer lamp flickersVideo SoundRemote Control Unit OtherYour TV Cable box brand Cable box brand Code number0156, 0070, 0203, 0063 0012, 0618, 0022, 06370044 0021, 0060, 0797,0047Satellite receiver brand 0775 Gradiente 0856 Hitachi 0819 Houston Tracker1367 RadioShack 0869 1333 Uniden 0724 Video Cipher II Plus 0361Solutions to Error Message Error Message Solution / ExplanationYou can’t use the disc because it contains errors from Specifications InputOutput Warranty Limited Warranty to Original PurchaserRegion Country Customer Care Center Web Site Challenger Road, Ridgefield Park, N.J.07660-0511 Valley Road, Suite Mount Arlington, NJ