Samsung HG32NA470PFXZA, HG46NA570LBXZA, HG46NA578LBXZA, 577, 478, 477, HG40NA570LFXZA Menu Items

¦¦ Menu Items

To Enter this menu: Press the MUTE → 1 → 1 → 9 → ENTER buttons in order.

To Exit from this menu : AC Power off, and then turn on again. Any changes you made are saved.

Menu	Item	initial Value		Description
Hospitality	Hospitality		Select the Hospitality mode.
		Standalone	yy	Standalone
Mode	Mode
			yy	Interactive
			Available in the Interactive menu only.
SI Vendor	SI Vendor	Samsung	Select the SI Vendor.
			yy Samsung / OCC / MTI / Nstreams / NXTV / Enseo / Cardinal /Guestek /
				SeaChange / EBL
			Set the default values, which will be applied when the TV is turned on.
	Power On	Last Saved	yy User Defined : Refers to the settings configured for Power On Channel,
	Channel EN			Channel Type.
			yy Last Saved : Refers to the last saved settings.
	Power On	3	When the TV is turned on, it switches automatically to this channel when in
	Channel		Stand Alone Hospitality mode.
			Channel search CABLE and AIR.
	Channel Type	...	yy	ATD, DTV : ON-AIR
			yy	CATV (Cable Analog TV), CDTV (Cable Digital TV) : CABLE TV
	Power On		Set the default volume values which will be applied when the TV is turned on.
		Last Saved	yy User Defined : Uses the settings configured for Power On Volume.
	Volume EN
			yy Last Saved : Uses the last saved settings.
Power On	Power On	...	TV will switch on at this Volume Level in Stand Alone Hospitality mode.
	Volume
	Min Volume	0	Minimum Volume Level user can set in Stand Alone Hospitality mode.
	Max Volume	100	Maximum Volume Level user can set in Stand Alone Hospitality mode.
			Front panel (Local key) operation on/off.
	Panel Button		yy Unlock : Unlock all panel keys
		Unlock	yy Lock : Lock all panel keys
	Lock
			yy Power : Lock all panel buttons except Power
			yy	Menu/Source : Lock Menu and Source
	Power On	TV	Select the input source the TV displays when it is turned on.
	Source
			Determines the TV's state when power returns after a power failure or after you
	Power On	Last Option	have unplugged the TV and then plugged it in again.
	Option		- LAST OPT: Returns to its last Power state. If it was in Stand-by, it returns to
			Stand-by. If it was on, it turns on.
	Channel		You can use the Channel menu option in the OSD.
	Setup
	Channel		Edit Channel Number and Name.
	Editor
Channel			yy On : Check the DTV Program channel number. (DTV channel editor is
				inaccessible)
	Dynamic SI	ON	yy Off : No check of the DTV Program channel number. (DTV channel editor
				is accessible, but additional channel program number update is not
				supported)

18 English

[HG470570 _HOTEL-ZA]ENG.indd 18

2012-04-17 �� 8:41:05