Samsung HG46NA578LBXZA, HG46NA570LBXZA, 577 Introduction, Operational Modes, Still image warning

Page 2

Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and specifications may be changed without notice.

Introduction

This TV has functionality that lets it interact with a set-back box (SBB/STB) and with other TVs in a computer controlled system for hotels and other hospitality businesses.

Interactive : When the TV is powered-up initially, it sends a command to identify the connected SBB/STB. If it identifies the SBB/STB, the TV switches to ONLINE mode which gives full control of the TV to the SBB/STB.

When the TV is in ONLINE mode, it stops accepting IR (Samsung remote) commands and acts according to the interface protocol.

Stand-Alone: If you are not using an SBB/STB and the TV cannot or does not identify an SBB/STB, you should switch the TV to STAND-ALONE mode with restricted operation.

Operational Modes

When this TV is in Hotel mode and is operated with an SBB/STB, it is in one of two states: ONLINE or STAND-ALONE

In the STAND-ALONE state, the TV will act as a Hotel TV, but without active communication. This is to prevent guests from trying to cheat the system by disconnecting the SBB/STB.

 

Stand-alone

 

SBB/STB Online if one success

Mode

 

 

 

within 10 attempts

 

Power

SBB/STB

SBB/STB Status-Attempt

ON

Online-10

every 2 seconds

consecutive fails

 

 

Online Mode

Poll Rate 20/sec

To set the options for Stand-alone or Interactive (Online) mode, refer to pages 17-21 (Setting the hotel option data : Menu Items.)

You can restrict all (or some) operations to prevent guests from "cheating" the TV system.

You can can set Volume limits and lock or unlock the Panel buttons.

Still image warning

Avoid displaying still images (such as jpeg picture files) or still image elements (such as TV channel logos, panorama or 4:3 format images, stock or news bars or crawls) on the screen. Displaying still pictures continually can cause uneven screen wear, which will affect image quality. To reduce the chance that this effect will occur, please follow the recommendations below:

Avoid displaying the same TV channel for long periods.

Always try to display a full screen image.

Reduce brightness and contrast to help to prevent the occurrence of after-images.

Use all TV features designed to reduce image retention and screen burn-in. Refer to the proper user manual section for details.

Securing the Installation Space

When you install the TV, maintain the distances shown below between the TV and other objects (walls, cabinet sides, etc.) to ensure proper ventilation. Failing to do so may result in a fire or problems with the TV caused by an increase in its internal temperature.

When using a stand or wall-mount, use parts provided by Samsung Electronics only.

xx If you use parts provided by another manufacturer, it may cause a problem with the product or cause the product to fall, leading to serioius injury.

Installation with a stand.

Installation with a wall-mount.

4 inches

4 inches

 

4 inches

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4 inches

4 inches

4 inches

4 inches

Additional Information

The appearance of the TV and its accessories may differ from the illustrations in this manual, depending on the TV. Be careful when you touch the TV if it is on or has been on for a period of time. Some parts can be hot.

[HG470570 _HOTEL-ZA]ENG.indd 2

2012-04-17 �� 8:40:49

Image 2
Contents LED TV Serial NoOperational Modes Securing the Installation SpaceIntroduction Still image warningContents Yy Security Screws Bit tool sold separately English AccessoriesHotel Mount Kit Installing the LED TV Stand Insert the Stand Guide into the slot on the bottom of the TVHotel Mount Kit Long Bolt 2EA Short Bolt 2EA Nut 2EA Washer 2EASwivel Assembling the swivel 32 inch TVs or largerUsing the TVs Controller Power is on Using the Function menuConnection Panel Component in / AV IN1 46 Model Component in / AVUSB / Cloning Remote Control Press to directly access channelsConnecting the TV to an SBB or STB TV Rear PanelBN39-01011B NStreams BN39-01110A Vendor Cable code Pin assign RemarkBN39-00865B Provided BN39-01011C LodgeNet MTI ProvidedAudio Connecting the Audio Output to an Audio AmplifierLAN Model HG478/HG578 Connecting the RJP Remote Jack Pack Hdmi Setting the Hotel Option Data Menu Items Mode It works normally Enable or disable the Picture MenuSelect the way to update clock data Add a video signal, it works normallyLow Sets the TV to low energy saving mode Default Popup window appearsIdent and switch the input source SolutionUpgrade Sirch Clone / Binary by manual Interactive remote controller for DTV that lets you deliverOff Only works Sirch Update on selected Sirch Update Time Select Sirch Update ChannelWelcome Message Hospitality Logo No USB USB is not connected USB CloningFailed Copy operation was not successful Clone folder will be labeled T-MST4AUSCBPower On Channel Hospitality ModePower On Channel EN Power On Volume ENSub Amp Mode Hdmi Music ModeUSB Media Mode Sub Amp VolumeMulti Code Remocon System Menu Setting Auto InitializePicture Menu Hotel Plug & Play Standalone mode Is set Interactive Hospital Option MenuTV will enter the RF Mode Press Power OFF To exit Yy UI ScenarioHG470570 HOTEL-ZAENG.indd 2012-04-17 USB SW Upgrade Method Sound Bar10~15 Installing the Wall MountProduct TV size Vesa screw hole Standard Screw Anti-theft Kensington Lock Specifications Dimensions WxDxH BodyJack panel detail / Rear view DimensionsUnit inches 13.9 English29.3 27.5 15.5 16.5 18.3 20.6 19.0 EnglishHG40NA570 / HG40NA577 / HG40NA578 Front view / Side view 36.5 20.3 21.6 23.8HG46NA570 / HG46NA577 / HG46NA578 Front view / Side view 41.7 20.3 24.6 26.8HG32NA470 / HG32NA477 / HG32NA478 Samsung Electronics America, Inc License This page is intentionally Left blank HG470570 HOTEL-ZAENG.indd 2012-04-17
Related manuals
Manual 2 pages 6.03 Kb Manual 10 pages 31.03 Kb