Samsung Flat Panel TV Manual for Optimal Software Upgrade and Sound Bar Setup
Page 31

¦¦ USB SW Upgrade Method

Samsung may offer upgrades to the TV’s SW in the future. Please contact the Samsung Hospitality Hotline at 1-866-894-0524 to receive information about downloading upgrades and using a USB drive to update the SW by connecting the USB drive containing the upgrade to the USB port located on the TV.

When the software is upgraded, video and audio settings you have made will return to their default (factory) settings. We recommend you clone the hotel settings so that you can easily reset them after the upgrade.

To upgrade the TV's software, follow these steps:

1.Insert a USB drive containing the SW upgrade into the USB port on the side of the TV.

2. Press the MENU button to display the menu.

Press the ▲ or ▼ button to select Support, and then press the ENTER button.

3. Press the ▲ or ▼ button to select SW Upgrade, and then press the ENTER button.

The message "Scanning for USB. This may take more than 1min." is displayed.

4.The message "Upgrade version XXXX to version XXXX? The system will be reset after upgrade." is displayed.

Press the ◄ or ► to select the OK, and then press the ENTER button.

Please be careful to not disconnect the power or remove the USB drive while upgrades are being applied. The TV will turn off and turn on automatically after completing the SW upgrade. Please check the SW version after the upgrades are complete.

¦¦ Sound Bar

yy Samsung Sound-Bars and Hospitality TVs in 2012

––Samsung Sound-Bars and hospitality TVs support the ARC feature in HDMI 1.4. If you connect a compatible Samsung Sound-Bar to a compatible Samsung hospitality TV using a single HDMI cable, guests can listen to the TV's sound through the Sound-Bar.

––Models supporting the ARC function are listed below:

yy Sound-Bars: HW-E350/E450/E550

yy Setting the Sound-Bars to Hotel Mode.

1. Set the following Hotel menu options:

––Hotel option > External Device > Sound Bar Out = On.

––Hotel option > Power On > Power On Volume EN = User Defined.

––Hotel option > Power On > Power On Volume > Set greater than 0.

––Hotel option > Power On > Max Volume > Set greater than 0.

2. Connect an HDMI cable from the HDMI OUT jack on the back of Sound-Bar to the HDMI2 port (supporting ARC) on the hospitality TV.

3. After the Sound-Bar is connected to the hospitality TV, when the TV turns on, the Sound-Bar automatically detects the TV, and then automatically switches to Hotel Mode.

Sound Bar Hotel mode functional characteristics:

yy Power On/Off is synchronized with the TV yy HDMI_CEC defaults to On

yy Functions through the “HDMI OUT” port only

yy Disables the "Input mode" key on the VFD to prevent unexpected audio-source changes.

yy Acquires adjustable Power On and Max Volume settings from the TV’s Hotel option menu. The Sound-Bar's Power On Volume and Max Volume values, however, are ½ of the Power On Volume and Max Volume settings in the TV's Hotel option menu. Example: If the TV's Power On Volume=20 and Max Volume=90, then the Sound Bar's Power On Volume=10 and Max Volume=45.

English 31

[HG470570 _HOTEL-ZA]ENG.indd 31

2012-04-17 �� 8:41:13

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Serial No LED TVStill image warning Securing the Installation SpaceIntroduction Operational ModesContents Hotel Mount Kit AccessoriesYy Security Screws Bit tool sold separately English Insert the Stand Guide into the slot on the bottom of the TV Installing the LED TV StandLong Bolt 2EA Short Bolt 2EA Nut 2EA Washer 2EA Hotel Mount KitAssembling the swivel 32 inch TVs or larger SwivelPower is on Using the Function menu Using the TVs ControllerComponent in / AV IN1 46 Model Component in / AV Connection PanelUSB / Cloning Press to directly access channels Remote ControlTV Rear Panel Connecting the TV to an SBB or STBBN39-01011C LodgeNet MTI Provided Vendor Cable code Pin assign RemarkBN39-00865B Provided BN39-01011B NStreams BN39-01110ALAN Model HG478/HG578 Connecting the Audio Output to an Audio AmplifierAudio Connecting the RJP Remote Jack Pack Hdmi Setting the Hotel Option Data Menu Items Add a video signal, it works normally Enable or disable the Picture MenuSelect the way to update clock data Mode It works normallySolution Default Popup window appearsIdent and switch the input source Low Sets the TV to low energy saving modeSelect Sirch Update Channel Interactive remote controller for DTV that lets you deliverOff Only works Sirch Update on selected Sirch Update Time Upgrade Sirch Clone / Binary by manualWelcome Message Hospitality Logo Clone folder will be labeled T-MST4AUSCB USB CloningFailed Copy operation was not successful No USB USB is not connectedPower On Volume EN Hospitality ModePower On Channel EN Power On ChannelSub Amp Volume Hdmi Music ModeUSB Media Mode Sub Amp ModeMulti Code Remocon Picture Menu Setting Auto InitializeSystem Menu Yy UI Scenario Standalone mode Is set Interactive Hospital Option MenuTV will enter the RF Mode Press Power OFF To exit Hotel Plug & PlayHG470570 HOTEL-ZAENG.indd 2012-04-17 Sound Bar USB SW Upgrade MethodProduct TV size Vesa screw hole Standard Screw Installing the Wall Mount10~15 Anti-theft Kensington Lock Dimensions WxDxH Body Specifications13.9 English DimensionsUnit inches Jack panel detail / Rear view19.0 English 29.3 27.5 15.5 16.5 18.3 20.636.5 20.3 21.6 23.8 HG40NA570 / HG40NA577 / HG40NA578 Front view / Side view41.7 20.3 24.6 26.8 HG46NA570 / HG46NA577 / HG46NA578 Front view / Side viewHG32NA470 / HG32NA477 / HG32NA478 Samsung Electronics America, Inc License This page is intentionally Left blank HG470570 HOTEL-ZAENG.indd 2012-04-17
Related manuals
Manual 2 pages 6.03 Kb Manual 10 pages 31.03 Kb
Top Page Image Contents